Best Table for Ooni Karu 2 Pro
8 min read · by Hannah Cole · Last updated: November 10, 2026
The best Ooni Karu 2 Pro table is the Ooni Large Modular Table, because Ooni names it as a good base for this oven. The Karu 2 Pro is 81 cm long and weighs 28.5 kg, so any table needs a top at least that long and a load rating well above the oven’s weight.
The Medium Modular Table and Ooni’s folding table are the other choices for an Ooni Karu 2 Pro table, and each comes with a clear trade-off. Check the current compatibility list for your country before you order, because the listings can differ by region.
| Pick | Best for | Key fact |
|---|---|---|
| Ooni Large Modular Table | Most buyers who want room and margin | 80 x 80 x 90 cm, 60 kg maximum load |
| Ooni Medium Modular Table | Smaller patios and lighter moves | 60 x 80 x 90 cm, 50 kg maximum load |
| Ooni Folding Table | Storage when the oven is not in use | 57.5 x 70 x 90 cm, 50 kg maximum load |
The Amazon picks below are Ooni’s Large and Medium Modular Tables plus one third-party 32 x 24 inch table whose listing says it suits 12 and 16 inch ovens. The Folding Table is covered in this guide, but we did not find an Amazon listing for it.
ooni Large Modular Outdoor Table
- ooni
- Prime
Pros & ConsViewHide
Reasons to buy
- Largest Ooni modular table, listed with a stainless steel work surface
- Two lockable castors, built-in hooks and two shelves
- Ooni lists compatibility with all of its ovens
Reasons to avoid
- Larger footprint and about 4 kg heavier than the Medium table
- Only 69% of about 58 ratings are 5-star, and 11% are 1-star
ooni Medium Modular Outdoor Table
- ooni
- Prime
Pros & ConsViewHide
Reasons to buy
- Powder-coated carbon steel frame with a stainless steel work surface
- Two lockable castors and built-in hooks for peels
- Lower shelf can hold a propane tank
Reasons to avoid
- Only 69% of about 58 ratings are 5-star, and 11% are 1-star
- Ooni lists it as incompatible with the Koda 2 Pro and Koda 2 Max
- Ooni recommends Ooni Shoes with the Koda 16 for stability
M METERXITY Stainless Steel Pizza Oven Table
- MMETERXITY
- Prime
Pros & ConsViewHide
Reasons to buy
- Stainless steel top, 32 x 24 in, sized for Ooni 12 and 16 inch ovens
- Listing states up to 650 lb total load (250 lb top, 150 lb shelves)
- Three shelves for peels, fuel and ingredients
Reasons to avoid
- Alloy steel frame, so check the finish if your patio sees heavy rain
- Fewer than 100 Amazon ratings so far
- Sold as a table for portable ovens, not a masonry base
How We Chose a Table for the Ooni Karu 2 Pro
This list does not come from hands-on testing. It compares the published dimensions and load ratings of Ooni’s tables against the oven’s own measurements, which is the fastest way to rule out a poor fit.
Footprint comes first, then load rating, then storage. Compatibility is a separate question from size: a table can match the dimensions and still be listed for only some ovens, so use the manufacturer’s current list as the last step. A table that is too short or too weak fails as an Ooni Karu 2 Pro table no matter how well it is made, so the size check comes before any feature comparison. Price, finish and extras matter only after a table passes both checks.
Ooni Karu 2 Pro Table Size and Weight
The Karu 2 Pro measures 810 by 500 by 830 millimeters, or 31.9 by 19.7 by 32.7 inches, and weighs 28.5 kg (63 lb), according to Ooni’s Karu 2 Pro product page.

The 81 cm length is the number that decides whether a table works as an Ooni Karu 2 Pro table. An 80 cm table top is one centimeter shorter than the oven, so both the Large and Medium tables overhang by about 1 cm at one end. A small overhang is not a failure, but it means the table has no spare length for a peel, a tray or a cover.
- Length: 810 mm, the longest side to match.
- Depth: 500 mm, the shorter side.
- Weight: 28.5 kg for the oven alone, before fuel and tools.
Check how each table listing measures its sides before you decide, and compare the oven against our Ooni Karu 2 Pro dimensions guide. Only the 80 cm side can take the oven’s length, so a table whose 60 cm side runs front to back will not hold the oven at all. Oven weight matters too: 28.5 kg is about 63 lb, so any table rated below that load is not a suitable Ooni Karu 2 Pro table, whatever its size.
Ooni Large Modular Table: The Recommended Base
The Large Modular Table is the Ooni Karu 2 Pro table to start with (see our Ooni Karu 2 Pro guide for the oven), because Ooni’s Karu 2 Pro page names it as a good base for the oven. Its published top is 80 by 80 cm, and the table is rated for a 60 kg maximum load.

The Cooking World’s review of the Ooni modular tables lists the Large table at 26 kg, which leaves a clear margin for the oven. Ooni’s current Large table page lists 80 x 80 x 90 cm, 26 kg, a 60 kg maximum load and compatibility with all Ooni ovens.
- Top: 80 x 80 cm, with a 90 cm height.
- Load: 60 kg maximum, about 31 kg more than the oven alone.
- Weight: 26 kg empty, so plan for the table itself to be heavy to move.
That margin matters because the load is not only the oven. Fuel, the stone, a peel and any cover add weight, and the Large table leaves room for them. Its 80 by 80 cm top also gives more surface than the Medium table for a peel and tools, even with the 1 cm overhang. For most buyers, that makes the Large table the simplest Ooni Karu 2 Pro table to choose.
Ooni Medium Modular Table: The Lighter Option
Whether the Medium table works as an Ooni Karu 2 Pro table depends on which side is 80 cm. The Medium Modular Table is 60 by 80 by 90 cm with a 50 kg maximum load, so it is lighter and easier to move, but its load margin over the oven is smaller and its top offers less surface.
After the oven’s 28.5 kg, about 21.5 kg of rated load remains for fuel, stone and tools. That is enough for a typical setup, but it leaves less room for a heavy cover or extra cooking gear than the Large table does.
Ooni’s Medium table page names the Karu 2 Pro among its compatible 12, 14 and 16 inch ovens, so compatibility is not the concern. The concern is the smaller load margin and the 1 cm overhang.
Ooni Folding Table and Storage
A folding table is the Ooni Karu 2 Pro table choice when storage space matters more than a fixed base. Ooni’s Folding Table page lists it as compatible with the Karu 2 Pro, at 57.5 x 70 x 90 cm and 10.4 kg, with a 50 kg (110 lb) maximum load, of which 35 kg (77 lb) is for the top surface. Its longest side is 70 cm, 11 cm shorter than the oven’s 81 cm length, so check how the oven sits on it before you rely on it.
The trade-off is stability. Judge a folding table by its listed load rating and surface size rather than by its portability, because a 28.5 kg oven needs a frame that stays flat and steady when it is in use.
If you store the oven in a garage or shed, measure the space first. The oven’s 830 mm height plus the table height sets the minimum clearance you need.
Load, Surface and Setup Checks
Choose a level, stable surface for your Ooni Karu 2 Pro table that carries the oven, fuel and tools with margin, and keep it outdoors. The Karu 2 Pro reaches 500 C (950 F), and Ooni’s explore page says it reaches that temperature in about 15 minutes.
- Fuel: kiln-dried hardwood logs no longer than 20 cm, or high-quality lump charcoal, not briquettes.
- Avoid high-resin woods and treated fuels, as Ooni’s product page advises.
- Gas: the product page lists an optional gas burner sold separately (see our Karu 2 Pro gas burner guide), while the explore page describes the gas side differently, so check exactly what your bundle includes.
Keep the table clear of the oven’s flame and heat, and check Ooni’s current setup guidance before the first burn. Those steps matter more than the table brand once the fit is right. For tools and add-ons, see our Ooni Karu 2 Pro accessories and the broader best pizza oven tables roundup. Before you buy any Ooni Karu 2 Pro table, confirm four things: the top length, the load rating, the compatibility list for your country, and whether your outdoor surface is level and stable.
Common Mistakes When Buying an Ooni Karu 2 Pro Table
The most common mistake is buying an Ooni Karu 2 Pro table by oven name alone and skipping the length and load check. The second is trusting an old review over the current listing for your country. A quick final check is to read the listing on the day you buy, since specs and compatibility can change over time.
- Ignoring the 81 cm length and buying a table whose side is shorter.
- Choosing the Medium table without adding the fuel and tool weight to the 50 kg load.
- Assuming a folding table has the same load rating as a modular table.
Frequently Asked Questions
Is the Ooni Large Modular Table a good Ooni Karu 2 Pro table?
Ooni names the Large Modular Table as a good base for the Karu 2 Pro on its product page, which makes it the leading Ooni Karu 2 Pro table choice on the manufacturer’s own guidance. Confirm the compatibility list for your country before you buy, because listings can differ by region.
What is the load rating of the Large table?
Ooni’s product page lists a 60 kg (132 lb) maximum weight capacity for the Large Modular Table, and the 2021 Cooking World review gives the same figure. That leaves about 31 kg above the Karu 2 Pro’s 28.5 kg weight for fuel, stone and tools.
Can the Medium table be an Ooni Karu 2 Pro table?
The Medium table is rated for 50 kg, which is enough for the oven but leaves less margin, and Ooni’s page names the Karu 2 Pro as compatible. Measure the 80 cm side against the oven’s 81 cm length.
How much does the Karu 2 Pro weigh?
The Karu 2 Pro weighs 28.5 kg, or 63 lb, according to Ooni’s product page. That figure is for the oven alone, so add fuel and accessories when you judge the table’s load.
Is a folding table a good Ooni Karu 2 Pro table?
A folding table suits storage better than a fixed base, but it gives less rigidity. Ooni lists its Folding Table for the Karu 2 Pro with a 50 kg maximum load, but its 70 cm long side is shorter than the oven’s 81 cm length, so check the fit first.
Start with the Large Modular Table when you shop for an Ooni Karu 2 Pro table, since it gives the most surface and load margin for the Karu 2 Pro. Choose the Medium table only after you confirm the 80 cm side and the compatibility list, and treat the folding table as a storage option that needs its specs checked first.
8 min readGear & PantryBest Cover for Ooni Karu 2 Pro: How to Choose the Right FitUpdated Nov 11, 2026
8 min readGear & PantryBest Table for Ooni Koda 2 Pro: Which Options Fit and What to CheckUpdated Nov 10, 2026
8 min readGear & PantryBest Table for Ooni Karu 2: Stands and Surfaces That FitUpdated Nov 11, 2026
9 min readGear & PantryOoni Koda 2 Pro Cover: Fit, Storage and What to Check Before You BuyUpdated Nov 10, 2026
8 min readGear & PantryBest Cover for Ooni Karu 2: What Fits and What to CheckUpdated Nov 11, 2026
8 min readGear & PantryOoni Karu 12 Table: Best Picks and Setup Checks for 2026Updated Nov 10, 2026