Ooni Karu 2 Pro Dimensions and Size Guide
7 min read · by Arjun Mehta · Last updated: November 6, 2026
The Ooni Karu 2 Pro dimensions on the official spec sheet are 19.8 inches wide, 32.4 inches long and 32.4 inches tall with the chimney (502 by 825 by 824 mm). The oven ships in a larger box that measures 24 by 37 by 16 inches, so check which set of numbers a listing is quoting.
Ooni Karu 2 Pro Dimensions: External Size
The Ooni Karu 2 Pro is 19.8 inches (502 mm) wide, 32.4 inches (825 mm) long and 32.4 inches (824 mm) tall, according to the external dimensions drawing on Ooni’s Karu 2 Pro dimensions sheet. The oven is a multi-fuel model, and the height figure includes the chimney.
| Ooni Karu 2 Pro dimensions | Value on the spec sheet |
|---|---|
| Overall width | 19.8 in (502 mm) |
| Overall length | 32.4 in (825 mm) |
| Overall height with chimney | 32.4 in (824 mm) |
| Chimney section above the oven body | 17.8 in (452 mm) |
| Oven body height | 9.6 in (244 mm) |
| Gap from the ground to the oven underside | 5 in (128 mm) |
| Leg spacing, side to side | 18.2 in (462 mm) |
| Leg spacing, front to back | 23.4 in (594 mm) |
The drawing splits the 32.4 inch height into about 17.8 inches for the chimney section, 9.6 inches for the oven body and 5 inches from the ground to the underside. Those partial figures matter if you plan a shelf or a low overhang above the oven.
The leg spacing is smaller than the overall footprint. The legs are 18.2 inches apart side to side and 23.4 inches apart front to back, so the contact points on the table are closer together than the overall footprint. Use the overall size, not the leg spacing, when you plan for fit.
Keep the Ooni Karu 2 Pro dimensions for the outside separate from the inside figures. The sheet has an internal dimensions drawing too, covered in the next section. Do not use an internal number as the outer size of the oven.
Cooking Surface and Pizza Size
The spec sheet’s internal drawing shows 17.7 inches (449 mm) across the lower width, 16.7 inches (423 mm) across the top and 10.9 inches (276 mm) for a narrower upper span. It also shows two height figures, 6.8 inches (173 mm) and 5.2 inches (132 mm). The sheet does not label which figure is the stone or the door opening, so this article does not state a cooking surface width or a maximum pizza size.

Pizza size depends on the stone and on how you turn the pizza, so the Ooni Karu 2 Pro dimensions alone do not settle it. Measure the usable stone with a ruler and then compare it with your peel. A peel that is wider than the opening makes loading harder, so check the door width as well as the stone.
- Measure the stone’s usable width and depth, not the whole box.
- Measure the door opening, since it limits how the peel enters.
- Measure your peel’s blade, then add room for the pizza to slide off.
- Confirm the maximum pizza size on Ooni’s product page before you buy.
Weight and Shipping Box
The Ooni Karu 2 Pro shipping box weighs 86.6 pounds (39.3 kg) according to the spec sheet, and that is the only weight figure from that source. The sheet does not give the oven’s own unboxed weight, so do not read the box weight as the weight of the oven alone.
The box itself is large. The sheet draws it at 24 inches (610 mm) high, 37 inches (950 mm) long and 16 inches (400 mm) deep. Those are the numbers many people mistake for the Ooni Karu 2 Pro dimensions of the oven itself, which is why they belong in a separate row from the external figures.
| Shipping box (spec sheet) | Value |
|---|---|
| Height | 24 in (610 mm) |
| Length | 37 in (950 mm) |
| Depth | 16 in (400 mm) |
| Weight | 86.6 lb (39.3 kg) |
Plan the lift around the unboxed weight from the product page, not the box. An oven of this size is awkward to carry at arm’s length, and the chimney and door can catch on a hand or a rail. Two people make the move safer, and both should lift from the base rather than from the chimney or the door.
Weight matters for the surface too. A table, stand or balcony rail must carry the oven plus the fuel and stone, so check the load rating of any stand before you place it.
Ooni Karu 2 Pro Dimensions and Your Space
Compare the Ooni Karu 2 Pro dimensions with your table or shelf, then add room for airflow and the height of the chimney. The oven fits only when the surface is at least 19.8 inches wide and 32.4 inches deep, with space left at the sides and back.
The internal side view shows the door open at 110 degrees, and that view runs 37 inches (941 mm) from front to back. With the Ooni Karu 2 Pro dimensions in hand, leave room in front of the oven for the open door and for loading, not only for the 32.4 inch body.

- Surface width and depth at least match the 19.8 by 32.4 inch footprint.
- Height clears the 32.4 inch total height, chimney included, plus any shelf, cover or overhang above the oven.
- Space remains at the back and sides for airflow and for your hands, and in front for the open door.
- The surface is level, stable and heat resistant, and it stays outdoors where the manual allows use.
Ooni’s manual sets the clearance and placement rules that matter for safety. Read those rules before you choose a spot, because a footprint that fits on paper may still be too close to a wall or a combustible surface. If you are leaving the oven outside, see whether you can leave a pizza oven outside before you pick a spot.
Why Listings May Show Different Sizes
Retailer pages can show unboxed, boxed or packaged figures, and the same oven can appear with different numbers. A listing that shows 37 by 16 by 24 inches is describing the shipping box, not the oven. The table below shows which figure to check for each line item.
| Figure | What to confirm |
|---|---|
| External dimensions (spec sheet) | 19.8 by 32.4 by 32.4 in, chimney included |
| Shipping box dimensions (spec sheet) | 24 by 37 by 16 in, with the box weight of 86.6 lb |
| Retailer dimensions | Whether the figure is the oven, the box or a stand and cover bundle |
| Retailer weight | Whether the figure is the oven alone or with packaging |
What this page has not confirmed
This article uses only the figures printed on the official spec sheet. The product page could not be read during this check, so the cooking surface, maximum pizza size and oven-only weight are left for you to confirm. Check Ooni’s current product page and the sales page you are buying from, then compare the two before you order.
If you are weighing other Ooni sizes, compare the Ooni Karu 2 size check, the Karu 12 dimensions and the Karu 16 size and weight guide, or browse the full set of oven model guides.
Frequently Asked Questions
How big is the Ooni Karu 2 Pro?
The spec sheet lists the Ooni Karu 2 Pro dimensions as 19.8 inches wide, 32.4 inches long and 32.4 inches tall with the chimney, or 502 by 825 by 824 mm. The shipping box is a separate figure at 24 by 37 by 16 inches.
How much does the Ooni Karu 2 Pro weigh?
The spec sheet gives a shipping box weight of 86.6 pounds (39.3 kg), not the oven’s own weight. Use the unboxed figure from the product page for lifting plans, and treat any box or packaged figure as a different number.
What size pizza fits in the Karu 2 Pro?
The spec sheet does not state a maximum pizza size, so this article cannot state one. Measure the usable stone, check the door opening, and confirm the maximum pizza rating on Ooni’s product page before you buy a peel or plan your dough size.
Can one person move the Karu 2 Pro?
Carrying the oven alone is hard to do safely, given the weight of the oven and its awkward shape. Two people are the safer choice, and you should wait until the oven is fully cool before moving it or touching the chimney.
Does the Karu 2 Pro fit on a balcony table?
It fits if the table is at least 19.8 inches wide and 32.4 inches deep, with room for airflow and for the chimney above. Measure the balcony table and the height to any rail or overhang, then check the clearance rules in Ooni’s manual.
Before you order, measure the table or shelf against the Ooni Karu 2 Pro dimensions of 19.8 by 32.4 by 32.4 inches and leave room for the open door. If a listing gives a different number, trust the manufacturer’s page first and use the retailer figure only as a cross-check.
8 min readBy Use & ModelOoni Koda 2 Pro Dimensions: Exact Size, Weight and Pizza SpaceUpdated Nov 7, 2026
9 min readBy Use & ModelOoni Karu 2 Dimensions: How to Check Size Before You BuyUpdated Nov 7, 2026
8 min readBy Use & ModelOoni Karu 2 Pro Recipes: What to Cook and How to StartUpdated Nov 8, 2026
7 min readBy Use & ModelOoni Karu 2 Pro Gas Burner: What Fits, What Fuel and How It Is Set UpUpdated Nov 8, 2026
8 min readBy Use & ModelOoni Karu 2 Pro Manual: Safety, Fuel and Lighting StepsUpdated Nov 8, 2026
8 min readBy Use & ModelOoni Karu 2 Pro Accessories: What Ooni Lists and What to CheckUpdated Nov 15, 2026