The Gozney Arc dimensions are 480 mm wide, 564 mm deep and 342 mm tall (about 18.9 x 22.2 x 13.5 in), and the oven weighs 20 kg (about 44 lb). Those are the figures for the oven itself, without a stand. The internal cooking space and the door opening matter just as much when you plan your pans.
Listings from different retailers do not always agree, so treat any single figure with caution. Compare your counter, your clearance and your stand plans before you choose between the standard model and the larger Arc XL.
Gozney Arc dimensions explained: what each number means
Gozney Arc dimensions are easiest to read when you split them into four parts: internal cooking space, external footprint, door opening and height. Each one answers a different fit question, so a good match on one does not guarantee a good match on the others.
The internal cooking space shows the floor you actually cook on. Check the width and depth separately, because you slide and turn pizzas on a rectangular floor with a peel, and a figure that looks generous on paper can still feel tight once you start turning a pizza.
The external footprint describes how much counter space the oven body takes up. For the Arc it is 480 mm by 564 mm (about 18.9 by 22.2 in), so compare that with your worktop, not the cooking space, and leave room at the back and sides for airflow and the gas connection.
The door opening is a separate measurement and often the one people overlook. It limits what can pass through the front, and the manual warns you not to put items in that are bigger than the oven mouth. It gives no door figure in its placement diagram, so measure the opening yourself against your largest bakeware.
Height is also split in two. The oven’s own height of 342 mm (about 13.5 in) is not the same as the total height once a stand is added. Gozney makes a separate Arc Stand, so add its height to the oven figure if you plan to use one.
When you read a product page, check the unit and the measurement type before you compare numbers. An outer width is not comparable with an internal width, so Gozney Arc dimensions only help when you compare like with like. The same rule applies to every other oven on your shortlist, whether it is the Ooni Koda 2 dimensions or another model.
Arc or Arc XL: compare the sizes before you buy
The Arc XL is the larger model: Gozney’s Arc and Arc XL manual shows it at 530 by 629 mm, against 480 by 564 mm for the standard Arc. Compare the two line by line on the same measurements, and read the Gozney Arc XL manual guide for the XL’s setup details, because a few centimeters of extra depth can decide whether the oven fits your counter.
| Measurement | What to compare | Where to check |
|---|---|---|
| Internal cooking space | Pizza diameter and tray size you need | Official product page for your region (the manual gives no cooking floor figure) |
| External footprint | Counter width and depth, plus clearance. Arc: 480 x 564 mm. Arc XL: 530 x 629 mm | Gozney manual, oven placement page |
| Door opening | Your largest pan or baking tray | Official product page for your region (not in the manual’s diagram) |
| Height with stand | Under cabinets, shelves or a covered patio. Oven alone: 342 mm for both models | Gozney manual, plus the official stand listing |
| Weight | Who will lift it and where it will sit. Arc: 20 kg. Arc XL: 25 kg | Gozney manual, oven placement page |
Start with the cooking space if pizza is your main use. Start with the external footprint if the oven must live on a small balcony, a narrow counter or a shared patio table. The Gozney Arc dimensions you prioritise depend on where the oven will spend most of its time.
Use the table as a checklist rather than a ranking. The right choice depends on the pizzas you cook and the space you have, not on which model has the bigger number, so read the gozney arc dimensions for each model against your own plan.
How to measure your space before you buy
Measure your counter, the clearance above it and the path to the oven spot first, because those three decide whether the Arc fits in practice. Write each figure down next to the official Gozney number for the model you are considering, and keep the manual’s clearance rule next to the Gozney Arc dimensions: 30 cm (about 12 in) at the back and sides and 100 cm (about 39 in) at the front from any combustible construction.
- Measure the counter depth and width where the oven will sit, not the whole run of worktop.
- Measure the height from the counter to the underside of any cabinet, shelf or overhang.
- Add the stand height if you plan to use the Arc Stand, then recheck the total height.
- Leave room behind and at the sides for the gas connection and a quick-disconnect device.
- Measure the door opening against your largest pan, peel and baking tray.
- Check the route from the door, gate or patio to the spot, so you can carry the oven without banging it.
Try a simple test before you order. Tape the measurements to the wall, mark the footprint on the counter with painter’s tape, and reach for your largest pan as if the oven were already there. This shows problems that a single number on a listing does not, and it is the fastest way to confirm that your Gozney Arc dimensions work in real life.
A common mistake is measuring only the cooking space and forgetting the stand and clearance, since gozney arc dimensions for the body alone leave out the parts that take up room in practice.
Gas safety when you move or position the oven
Disconnect the oven from the gas supply before you move it, and lock the casters whenever it is connected, even if you are not cooking. Gozney’s Arc Stand technical manual sets out these rules for the gas oven and stand.
- Use a Gozney supplied gas connector, or one that meets ANSI Z21.69 / CSA 6.16.
- Use a quick-disconnect device that meets ANSI Z21.41 / CSA 6.9.
- Never use the gas connector or quick-disconnect piping to limit how far the oven moves.
- Do not move the oven while it is still warm. Wait for it to cool fully.
- Push or pull the oven from the stand, not from the oven body.
Plan the gas route before you position the oven (see also the Gozney Arc natural gas answer), because the gozney arc dimensions of the footprint mean little if the hose cannot reach the connection. Gozney Arc dimensions tell you the footprint, but the gas route decides whether that space is usable day to day.
The full cautions are in the Arc user manual supplied with the oven. Follow that manual over any general advice, and if the manual and your installation plan disagree, ask the supplier before you connect the gas.
Caring for the stand and the footprint over time
Keep the wooden stand out of direct sunlight and rain when it is not in use. Dry the wood with a soft cloth after any moisture, and apply an outdoor furniture oil treatment every 8 weeks.
Check the casters and the stand joints at the start of each cooking season, and compare the Gozney Tread dimensions if you are weighing Gozney’s other models, and recheck the gozney arc dimensions of the footprint if you have changed the spot. Loose parts change the footprint and can make the oven harder to move safely, so tighten or replace them before you lift or roll the oven again.
Frequently Asked Questions
Are the Gozney Arc dimensions the same as the Arc XL?
No. Gozney’s manual shows the Arc XL at 530 by 629 mm and 25 kg, against 480 by 564 mm and 20 kg for the Arc, so the Gozney Arc dimensions differ. Both ovens are 342 mm tall on their own. Do not assume one stand fits both without checking.
Do I need the Arc Stand to use the oven?
Gozney offers the Arc Stand as a separate accessory, so the gozney arc dimensions of the oven alone will not show the full height, and its technical manual covers casters, locking and gas connection. Whether you need it depends on your setup, so check the official product page for your region before you buy.
Should I measure the cooking space or the outside?
Measure both, because Gozney Arc dimensions only answer your question when you read them together. The internal cooking space shows what fits inside, while the external footprint shows whether the oven fits your counter with room to work and to reach the gas connection.
Can I move the oven while it is connected to gas?
Disconnect the gas supply first. The Arc Stand manual says to disconnect the oven from the gas supply before moving it, and to keep the casters locked whenever it is connected, even when not in use. Also wait until the oven has cooled fully, since the manual says not to move it while warm.
Where can I find the Gozney Arc weight?
Gozney’s manual gives 20 kg (about 44 lb) for the Arc and 25 kg (about 55 lb) for the Arc XL. Use that gozney arc weight to plan the lift and to check that your counter or stand can hold the oven easily, and confirm it against the official product page for your region.
Before you buy, measure your counter, check the door opening against your largest pan and confirm every figure on Gozney’s official page for your region. Those checks turn Gozney Arc dimensions from a list of numbers into a clear yes or no. Leave enough room to move the oven safely once the gas is disconnected, and browse the oven model guides for the other sizes you are weighing.