Gozney Arc XL Replacement Stone: Model Check and Fitting
5 min read · by Hannah Cole · Last updated: November 15, 2026
A gozney arc xl replacement stone is the removable cooking floor for the larger Arc XL, and it must be matched to the XL rather than the standard Arc. Confirm your model number (Arc XL is GOZ-1728 in Gozney’s manual), order the stone for that model, and keep water away from it. The stone sits loose in the oven, so setting it correctly matters as much as buying the right one.
The Arc XL is a bigger oven with a bigger stone, and that makes a wrong-size part more likely to cause trouble. This guide covers how to tell whether the stone needs replacing, how to confirm the fit before buying, how to set the stone once it arrives and how to protect it from cracking.
Why the Arc XL Stone Is Its Own Part
The Arc XL stone is made for the Arc XL and should not be treated as a general Arc part, because the two ovens are separate models with separate manual numbers.
The Arc and Arc XL technical manual covers both models in one document. It lists the Arc XL as GOZ-1728 and the standard Arc as GOZ-1485, and it sets out the different burner ratings and injector sizes for each. Those differences are a clear sign that the two ovens are not interchangeable, so the stone for one should not be assumed to fit the other.

Checking the Gozney Arc XL Replacement Stone Before You Order
Start with the model and the existing stone, and only then compare part numbers. The fastest check is the model label on the oven, which should read GOZ-1728 for the Arc XL. For the oven’s basics, see the Gozney Arc XL overview.
A Canadian retailer lists a Gozney Arc XL replacement stone under part number PA1845, and the same seller lists the standard Arc stone separately as PA1844. Treat the number as a starting point to check with Gozney, not as a guarantee of fit, because part listings can be out of date. If you cannot confirm the stone size from Gozney’s own documentation, measure the stone you have and send the measurements to Gozney customer experience before you order.
- Read the model label on the Arc XL and write down GOZ-1728.
- Measure the current stone from front to back and side to side, and record any chips or warping.
- Ask Gozney to confirm the part for that model and serial number before you pay.
- Keep the old stone until the new one is confirmed, so you can compare them side by side.
Fitting and Adjusting the New Stone
Set the stone with the supplied tool, check that it sits flat, and remove any packaging or retention wedges before the first firing. More parts are covered in the Arc XL accessories list.
The manual says the stone is removable and not fixed in place, so it can shift backwards during use. Before first use, remove the blue stone retention wedges and any packaging inside the oven. If there is a large gap at the front, hook the back of the stone with the stone adjustment tool and pull it forward, then check the gap again. Make the adjustment in small steps, because a stone that is pulled too far can leave a gap at the back that is harder to see. Once the stone sits square, run the oven briefly and check that the stone has not shifted before you cook a pizza on it.

Use only the tools Gozney supplies for their intended purpose. The manual states that damage from misusing the tools is not covered by the warranty.
Protecting the Stone From Cracking
Do not pour water on the stone. The manual says it will likely crack the stone, and it can be dangerous when oil and grease are involved. Care habits that protect the stone are in cleaning the Arc XL.
Clean the stone by brushing once it has cooled, and avoid sudden temperature changes such as splashing cold liquid onto a hot surface. A stone that is cleaned gently and left to cool naturally is far less likely to split.
Inspect the stone every time you clean the oven. Look for cracks, chips, or a stone that no longer sits level on its supports. If you find a crack or a stone that moves once the oven has cooled, stop cooking on it and order a replacement before the next session. The manual also says to cover the oven only when it is fully cooled, because covering the mouth while the flame is active is unsafe and covering a warm oven traps condensation around the stone.
- Brush debris off when the oven has cooled, rather than when it is hot.
- Never add water or any liquid to a hot stone.
- Re-check the stone position after moving or cleaning the oven.
Frequently Asked Questions
Is the Arc XL stone the same as the Arc stone?
Not necessarily. The Arc XL (GOZ-1728) and the Arc (GOZ-1485) are separate models, so confirm the part for your exact model before ordering.
What model number is the Arc XL?
Gozney’s Arc and Arc XL technical manual lists the Arc XL as GOZ-1728. Check the label on your oven to confirm it matches before you buy.
Is the Arc XL stone fixed in place?
No. The manual describes a removable stone design that is not fixed inside the oven, which is why it can be adjusted with the supplied tool.
Can I clean the Arc XL stone with water?
No. Pouring water on the cooking stone will likely crack it, so brush it clean once it has cooled.
A replacement stone for the Arc XL is worth getting right the first time. Confirm the GOZ-1728 model, measure the stone you have, and ask Gozney to confirm the part. Set the stone with the supplied tool and keep water off it, and the replacement should give you many more cooks.
8 min readGear & PantryGozney Arc XL Cover: What to Check Before You BuyUpdated Nov 8, 2026
9 min readGear & PantryGozney Arc XL Stand: What to Check Before You BuyUpdated Nov 8, 2026
5 min readGear & PantryGozney Arc Replacement Stone: Fit, Care and When to ReplaceUpdated Nov 15, 2026
8 min readGear & PantryGozney Arc Stand: Size, Weight and Table Checks Before You BuyUpdated Nov 17, 2026
10 min readGear & PantryGozney Dome S1 Stone Replacement: How to Match the Right SideUpdated Nov 11, 2026
8 min readGear & PantryGozney Tread Replacement Stone: How to Choose and Confirm the Right FitUpdated Nov 11, 2026