Gozney Dome S1 Stone Replacement: How to Match the Right Side
10 min read · by Hannah Cole · Last updated: November 11, 2026
A Gozney Dome S1 stone replacement must match your S1 model and the side that failed. Check both before you order, because the left and right stones are sold as separate parts. The S1 is a different model from the Dome Gen 2 and the original Dome, so a stone from another model can look right and still not fit.
| Check | Why it matters | Where to check |
|---|---|---|
| Model name | Stone kits are listed per model, so a near match is not enough | Technical manual, model and type line |
| Left or right side | Each side is sold separately, so one stone will not replace the other | Oven layout diagram in the manual |
| Stone adjustment tool | The tool is part of the oven component layout | Component diagram in the manual |
| Current stock | Gozney US lists both S1 stone kits, but stock and price can change | Gozney US product pages and the retailer listing |
Amazon lists the Gozney S1 stone kits without a current price, so the box below shows S1 care items instead: a cover made for the Dome S1 (see our best cover for the Gozney Dome guide), an infrared thermometer for checking oven heat and a stone brush and scraper. Order the Gozney Dome S1 stone replacement itself from Gozney after you check the model and side.
ZJYWSCH Pizza Oven Cover for Gozney Dome Dome S1
- ZJYWSCH
- 0.7 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Made to fit the Gozney Dome and Dome S1
- 600D polyester with a waterproof coating
- Drawstring hem helps hold it in wind
- Strong rating across roughly 475 Amazon reviews
Reasons to avoid
- Does not fit the Dome Gen 2 or Dome XL Gen 2
- Third-party cover, not made by Gozney
- Protects against weather only
Ooni Digital Infrared Thermometer Gun
- 0.2 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Reads surface heat up to 999 F in about 300 milliseconds
- 87% of ratings are 5-star
- Includes 2 AAA batteries
Reasons to avoid
- Reads the surface only, not the air inside the oven
- Battery powered
Confirm Your Model Before You Buy
The US S1 technical manual names the model as Dome S1, Model/Type 4555-S1-02, so match that exact name before you compare any listing. A stone that is the right size for one Dome can still be wrong for the S1. Our Gozney Dome S1 dimensions guide covers the oven itself.
Start with the label on the oven and the manual cover. Read the model line rather than relying on a nickname such as “the Dome,” because that name covers several generations. A Gozney Dome S1 stone replacement is only useful when the model line matches, so this step comes before any price comparison.

Gozney sells stone kits per model, for example separate Arc and Arc XL stones as well as the S1 kits. Compare the full model name on each kit listing word for word against your manual, and do not accept a close match as a fit. Each kit page should name the model it is meant for, so a Gozney Dome S1 stone replacement listing that leaves out the model is a warning sign.
Use this order to confirm the match:
- Find the model line on the manual cover or the oven label.
- Write down the full S1 model and type number.
- Match that name to the kit title, word for word.
- Ask the retailer or Gozney support to confirm the fit if the titles do not match exactly.
Gozney Dome S1 Stone Replacement: Left or Right
Gozney lists the Dome S1 replacement stones as separate left and right kits, so you should order only the side that failed. The listing titles separate the two parts, and the stones are not interchangeable. Settle the side question first, because it decides which Gozney Dome S1 stone replacement you need.
Decide the side from the oven layout, not from which stone looks more worn. The manual shows the oven layout, so use it to match the stone position before you buy. A stone that looks more worn is not always the side that needs replacing, because wear can look different from one angle to another.
When you compare a Gozney Dome S1 stone replacement listing, check that the side in the title matches the side you measured or identified in the manual. A mismatch between the title and the diagram is a reason to pause, not a reason to guess.
Gozney US describes the left kit as the replacement for the left hand, burner side of the S1 stone and the right kit as the replacement for the right hand side. Each Gozney Dome S1 stone replacement kit includes the stone, stone removal handles, a stone adjustment tool, a landing bay protective screen and protective gloves, according to the Gozney US left stone kit listing. Gozney adds that the part comes with the original oven as standard, so you only need to buy one if the original is lost or damaged.
| Stone | What to check | Order rule |
|---|---|---|
| Left stone | Its position in the oven layout diagram | Order only if the left side is damaged |
| Right stone | Its position in the oven layout diagram | Order only if the right side is damaged |
| Both stones | Whether both sides show cracks or wear | Order both only if both sides are damaged |
If you still cannot tell which side is damaged, do not guess from a photo of a different model. Ask Gozney support for a written answer, because a manufacturer reply is safer than a guess from a listing.
What the Stone Adjustment Tool Does
The S1 manual component diagram lists a stone adjustment tool next to the thermometer, the burner guard and the flue outlet, so check that you have the tool before you start the swap.
Gozney includes a stone adjustment tool in each Gozney Dome S1 stone replacement kit. In the Adjusting the Stones section, the manual explains that the S1 stones are removable rather than fixed, so they can shift backward in transport, and that the tool hooks the back of a stone to pull it forward when a large gap shows at the front. It also says to remove the blue stone retention wedges and other packaging before first use. The Gozney Dome S1 technical manual shows the component layout in full.
Keep the manual open on the day of the swap, because the component diagram is the reference for every Gozney Dome S1 stone replacement you fit.
Follow the Adjusting the Stones section of the manual and do not force the stone into place. If the stone does not sit level, stop and check the model and the side before you continue.
Before you open the oven, lay the new Gozney Dome S1 stone replacement next to the old stone and compare the edges and the overall size. A match on those points is a better sign of fit than a match on the product photo alone.
Cracks, Heat and Care
A visible crack is the clearest sign that a stone may need replacing, and the manual warns that pouring water onto the cooking stone will likely crack it. Cracks that run across the cooking surface deserve a closer look than surface stains.

Look for cracks that run from the surface to an edge, and note any stone that has broken into pieces. A crack alone does not tell you how the stone will perform, so compare what you see with the care guidance for your model. Photograph the stone from the same angle before and after cleaning, so you can judge whether a mark is a stain or a new crack.
Never pour water onto the cooking stone. The S1 manual says this will likely crack it and can be dangerous because of oil and grease. Do not follow generic pizza stone advice if it conflicts with the manual. For general background, see why a pizza stone cracks.
A cracked stone is a stronger case for a Gozney Dome S1 stone replacement than a stone that only shows stains or soot. Stains alone are usually a cleaning question, and the manual is the right place to check the cleaning method for your model before you spend money on a part.
If the stone is damaged and you cannot tell which side is affected, send Gozney support the model name and a clear photo of the stone. Keep the photo and your reply together until the replacement arrives.
Gozney Dome S1 Stone Replacement: Is It Still Available
As of 2026-11-11, the Gozney US store lists both Gozney Dome S1 stone replacement kits, the left stone and the right stone, at $99.99 each and marked in stock. Listings change, so check current stock and price before you plan a repair.
A Gozney Dome S1 stone replacement with no stock signal should be treated as unconfirmed until the seller or Gozney says otherwise.
Check each listing for stock and the exact part name. An older listing or a search snippet can show a stone that is no longer available, so confirm the status on the day you buy.
If your side is out of stock, ask the retailer when the next batch is expected. Do not buy a stone for a different Dome generation as a substitute, because the size and fit can differ even when the photo looks similar.
If you are weighing a Gozney Dome S1 stone replacement against other repairs, or against a new oven (see our Gozney Dome S1 overview), the stone is the smaller step only when the model still has stock. Treat each Gozney Dome S1 stone replacement as a part-level repair. Before you commit, confirm that the part is still sold for your model, because a discontinued part may leave you without a replacement option. More accessory and repair guides are in Gear & Pantry.
Frequently Asked Questions
Is the Dome S1 stone the same as the Dome Gen 2 stone?
Do not assume so. The S1 is a separate model from the Dome Gen 2, and Gozney lists its S1 stone kits under the S1 name, so a stone that fits one model can be the wrong fit for the other. Compare the full model name on the kit listing with your manual before you order, and do not treat a near match as a fit.
Do I need both the left and right stones?
Only if both sides are damaged. Gozney lists the stones as separate left and right kits, so you order the side that failed. Use the oven layout diagram in your manual to identify the damaged side, then buy the matching stone.
Can I fit the stone myself?
The manual covers adjusting the stones, and Gozney includes the stone adjustment tool in each kit. Follow those steps closely and stop if the stone does not sit level. If you are unsure, ask Gozney support before you attempt the swap, and confirm the Gozney Dome S1 stone replacement fit first.
What if I cannot tell which side is damaged?
Match the damaged stone to the layout diagram in your manual, then send a clear photo to Gozney support with your model name. A written reply from the manufacturer is safer than a guess from a listing photo or a forum post.
Where should I check the current listing?
Check the Gozney US S1 stone kit pages first, then confirm the part name and stock at the retailer. Listings can change, so check the status on the day you order.
Before you order a Gozney Dome S1 stone replacement, confirm the model name, the side and whether the part is still in stock. A stone that matches your manual will fit better than the cheapest listing. If the fit is still unclear, contact Gozney support before you pay.
9 min readGear & PantryGozney Dome S1 Cover: What Fits and When to Use ItUpdated Nov 11, 2026
8 min readGear & PantryGozney Dome S1 Stand: Clearance, Floor Load and Setup RulesUpdated Nov 17, 2026
8 min readGear & PantryGozney Tread Replacement Stone: How to Choose and Confirm the Right FitUpdated Nov 11, 2026
9 min readGear & PantryGozney Dome Peel: How to Pick the Right Blade and TypeUpdated Nov 10, 2026
5 min readGear & PantryGozney Arc Replacement Stone: Fit, Care and When to ReplaceUpdated Nov 15, 2026
5 min readGear & PantryGozney Arc XL Replacement Stone: Model Check and FittingUpdated Nov 15, 2026