Ooni Koda 2 Pro Accessories: What Ooni Confirms and What to Check
8 min read · by Arjun Mehta · Last updated: November 15, 2026
The Ooni Koda 2 Pro accessories that Ooni confirms are a rotating stone and a temperature hub with a digital food probe. The hub and probe come with the oven, while the rotating stone is confirmed only as a compatible accessory. Covers, peels and gas burners are not confirmed for this model on any official page read for this guide.
Covers, peels and gas burners appear in Ooni’s site menus, but no official Pro page confirms them for this model. Check the model name on each product page before you buy any Ooni Koda 2 Pro accessories.
This guide to Ooni Koda 2 Pro accessories is general information and does not replace the manual that came with your oven. The Koda 2 Pro is built for outdoor use only.
The listings below are not confirmed Ooni Koda 2 Pro accessories. They are the oven itself plus two general Ooni tools, an infrared thermometer and a wire brush with scraper, that Ooni’s Pro page does not name as model-specific, so check each listing before you order.
Pros & ConsViewHide
Reasons to buy
- 18-inch gas oven, the largest size in the Koda 2 line
- Listing quotes a 160°C to 500°C temperature range
- Regulator and hose included for propane
Reasons to avoid
- Propane only and not compatible with natural gas
- About 66 lb unboxed, so it is heavy to move
- Needs more table space than the 14-inch Koda 2
Ooni Digital Infrared Thermometer Gun
- 0.2 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Reads surface heat up to 999 F in about 300 milliseconds
- 87% of ratings are 5-star
- Includes 2 AAA batteries
Reasons to avoid
- Reads the surface only, not the air inside the oven
- Battery powered
Pros & ConsViewHide
Reasons to buy
- Wire brush with scraper for pizza stones and grills
- 70% of ratings are 5-star
- Short handle for tight spots
Reasons to avoid
- Short handle puts your hand close to the stone
- Only 18 Amazon ratings so far
Which Ooni Koda 2 Pro Accessories Are Confirmed
Ooni’s Koda 2 Pro page confirms that the Connect Digital Temperature Hub comes with the oven and that the Koda 2 Pro is built solely for outdoor use.
| Item | What Ooni’s page says | Status |
|---|---|---|
| Temperature hub | The Koda 2 Pro comes with the Ooni Connect Digital Temperature Hub. | Included |
| Digital food probe | Part of the hub package. | Included |
| Removable visor | Mentioned for cooking larger dishes. | Not stated |
| Pizza stone | The oven is listed with an 18-inch pizza stone. | Not stated |
| Outdoor use | Built solely for outdoor use. | Required |
The hub pairs with the oven, but the page gives no size details for it. Read the hub’s own product page for its specifications, and check the full details on Ooni’s Koda 2 Pro page.
Among the Ooni Koda 2 Pro accessories, the Koda 2 Pro page describes the digital food probe as a way to make sure meats reach the right temperature. Treat that as Ooni’s description of the tool, and follow the manual that came with your oven for setup and use. For oven readings in general, see our Koda 2 Pro temperature guide.
Rotating Stone for the Koda 2 Pro
Ooni’s rotating stone page lists the Koda 2 Pro as one of three compatible models, alongside the Koda 2 and Koda 2 Max.

The rotating stone is the accessory Ooni confirms most clearly among the Ooni Koda 2 Pro accessories. Its rotating stone page names the following models as compatible:
- Koda 2
- Koda 2 Pro
- Koda 2 Max
If you are still choosing between the Pro and the base model, our Koda 2 Pro vs Koda 2 comparison covers the differences.
The page gives no diameter for the stone, so its size is not confirmed here. Compare the stone’s product page with the cooking surface of your oven before you order.
The same rotating stone page does not list incompatible items. That silence is not a fit guarantee for other products, so check every stone against its model name. The Koda 2 Pro page gives an 18-inch pizza stone as part of the oven, a useful reference, but the product page of any accessory should confirm its own size.

Covers and Pizza Peels: What Is Not Confirmed
No official Ooni page read for this guide confirms a cover or a pizza peel for the Koda 2 Pro, so both need checking before you buy.

Ooni’s navigation lists pizza peels and oven covers, but the Pro page gives no compatibility or sizes for either of these Ooni Koda 2 Pro accessories. Ooni’s Canada page for the base Koda 2 lists 12 to 14 inch peels as suitable, but that statement covers the base model only. Our Ooni Koda 2 accessories guide covers that model.
- Confirm that the cover names the Koda 2 Pro, not only the base Koda 2 or the Koda 2 Max.
- Measure the peel against your oven’s cooking surface before you buy.
- Check the peel’s product page for a named model rather than a general size range.
Ooni’s navigation groups covers, peels and stones into separate categories. A menu entry does not show which model a product fits, and the Koda 2 Pro page does not link any cover or peel to this model. Until an official product page names the Koda 2 Pro, treat the item as unconfirmed.
Gas Burners and Other Add-Ons
Gas burners and pizza oven tables appear in Ooni’s navigation as possible Ooni Koda 2 Pro accessories, but the Koda 2 Pro page does not say which model they fit or whether they are sold separately.
Retailer listings for Ooni Koda 2 Pro accessories can group several items under one title. The contents of those listings were not verified for this guide, so check each item against its official product page instead of relying on a bundle name.
- The model name written in the item’s own title.
- Whether the item is included with the oven or sold separately.
- The sizes listed on Ooni’s page for that item.
Ooni’s Canada page describes the oven as gas powered, so any burner, fuel or gas part among your Ooni Koda 2 Pro accessories should be checked against the gas type and pressure in the manual that matches your oven, and never fitted if the manual does not describe it.
Safe Use with Koda 2 Pro Accessories
Ooni’s Koda 2 manual says to use only Ooni-approved or official accessories and spare parts. That manual is written for the base model, so confirm the same rules in the Koda 2 Pro manual.
- Use only Ooni-approved or official accessories and spare parts.
- Do not modify the appliance. Contact Ooni support to obtain replacement parts.
- Never operate the oven within 40 inches (1 m) of any structure, combustible material or another gas cylinder.
- Allow the oven to cool completely before covering or moving it.
These are the rules to check for any Ooni Koda 2 Pro accessories you consider. They do not replace the Pro manual, which may set different accessory or clearance details from the base model manual.
How to Check an Accessory Before You Buy
Confirm each of the Ooni Koda 2 Pro accessories you consider against its model name, Ooni’s official page and the manual that matches your oven before you buy.
- Find the exact model name on the accessory’s product page.
- Confirm that the Koda 2 Pro is named, not only the Koda 2 or Koda 2 Max.
- Check whether the item is included with the oven or sold separately.
- Read the Koda 2 Pro manual for accessory and clearance rules.
- Ask Ooni support when a page conflicts or stays silent about a model.
Ooni’s manual asks for Ooni-approved or official accessories, so an item from another seller needs its own confirmation of fit and safety before you use it.
Save the model name, the product page and the date you checked each of your Ooni Koda 2 Pro accessories. If a seller later changes the listing, that record lets you compare what was confirmed at the time of purchase.
Frequently Asked Questions
Is the temperature hub included with the Koda 2 Pro?
Yes. Ooni’s Koda 2 Pro page says the oven comes with the Ooni Connect Digital Temperature Hub, and the hub package includes a digital food probe. The page gives no size details for the hub, so check its product page before you rely on its readings.
Is the rotating stone compatible with the Koda 2 Pro?
Yes. Ooni’s rotating stone page lists the Koda 2 Pro, along with the Koda 2 and Koda 2 Max, as compatible. The page does not state a diameter, so compare the stone’s size with your oven before you order.
Can the Koda 2 Pro be used indoors?
No. Ooni’s Koda 2 Pro page states that the oven is built solely for outdoor use. Keep it outdoors, away from structures and combustible material, and follow the manual that came with your oven for clearances.
Do I have to use Ooni accessories only?
For Ooni Koda 2 Pro accessories, Ooni’s Koda 2 manual, written for the base model, says to use only Ooni-approved or official accessories and spare parts. The Koda 2 Pro manual was not read for this guide, so check its wording. Ask Ooni support for replacement parts rather than modifying the oven.
Which peel size fits the Koda 2 Pro?
No official Pro page read for this guide confirms a peel size among Ooni Koda 2 Pro accessories. Ooni’s Canada page for the base Koda 2 lists 12 to 14 inch peels as suitable, but that statement covers the base model only. Check the peel’s product page for its model name before you buy.
Can I cover the oven right after cooking?
No. Ooni’s Koda 2 manual says to allow the oven to cool completely before covering or moving it. Cover the oven only after it has cooled, and keep it at least 40 inches, or 1 m, from any structure, combustible material or other gas cylinder.
If a product page does not name the Koda 2 Pro, treat the item as unconfirmed until Ooni or the seller says otherwise. A part that does not fit wastes money and can leave a gas oven without a working setup. Start with the hub and the rotating stone among the Ooni Koda 2 Pro accessories, then check every other item against the official page and the manual. Our Ooni Koda 2 Pro review and the wider Ooni pizza oven lineup guide cover the oven itself.
8 min readBy Use & ModelOoni Karu 2 Pro Accessories: What Ooni Lists and What to CheckUpdated Nov 15, 2026
9 min readBy Use & ModelOoni Koda 2 Pro Temperature: Max Heat and How to Check ItUpdated Nov 7, 2026
9 min readBy Use & ModelOoni Koda 2 Accessories: What Fits and What to CheckUpdated Nov 15, 2026
9 min readBy Use & ModelOoni Koda 2 Pro Manual: Step-by-Step Use GuideUpdated Nov 7, 2026
9 min readBy Use & ModelOoni Koda 2 Pro Natural Gas: Is It Supported?Updated Nov 7, 2026
8 min readBy Use & ModelOoni Koda 2 Pro Dimensions: Exact Size, Weight and Pizza SpaceUpdated Nov 7, 2026