How to Light Ooni Karu 16 With Wood, Charcoal or Gas
8 min read · by Arjun Mehta · Last updated: November 7, 2026
Knowing how to light Ooni Karu 16 depends on your fuel. For wood or charcoal, build a small base fire with natural firestarters, then add fuel little by little. For gas, attach the Ooni Gas Burner and push and turn its knob until it clicks.
The steps below explain how to light Ooni Karu 16 following Ooni’s official Karu Essentials Guide. If your manual gives different figures for your model, follow the manual.
What You Need Before You Light Ooni Karu 16
Before you learn how to light Ooni Karu 16, place it on a sturdy wooden or stone surface and open the chimney vent. Ooni does not recommend glass or plastic surfaces.
- Kiln-dried hardwood or lump charcoal that fits the grate.
- Natural firestarters, or a blowtorch for wood.
- An Ooni Gas Burner and a propane tank, if you cook with gas.
- Dry paper towels for seasoning and cleaning.
Ooni Karu is designed for outdoor use only. Do not fire it in high winds, and never leave it unattended while it is lit. Keep children and pets at a safe distance, because the outer shell gets hot.
An open chimney vent increases the draw of air through the oven, which creates more powerful flames and more heat. Remove the chimney cap so the airflow is at its maximum.
Season Ooni Karu 16 Before Its First Use
Run Ooni Karu at top temperature for at least 30 minutes before your first cook to burn off oils and coatings left from manufacturing.
Once the 30 minutes are up, let the oven cool completely before your first real fire. Then wipe the inside with dry paper towels. Ooni calls this step seasoning, and it removes the residue the manufacturing process leaves behind.
Never use water to clean the grate or to cool the oven down. Ooni also advises waiting at least one hour after extinguishing before you move or clean it, and storing it only when it is completely cool and dry.
How to Light Ooni Karu 16 With Wood
Light 3 to 6 pieces of kiln-dried hardwood with natural firestarters or a blowtorch, then refuel once the wood has mostly burned to embers.
Ooni’s guide recommends wood pieces about 15 cm (6 in) long, and names beech and oak as its favorites. Avoid treated or painted wood. Resinous woods such as pine or spruce can add unwanted flavors to your food.

Follow these steps to light the wood.
- Place 3 to 6 pieces of wood on the grate.
- Light them with natural firestarters or a blowtorch.
- Refuel when the wood has mostly burned to embers, before all the visible flames disappear.
- Add fuel little and often, and never let it overflow the grate.
Some smoke is normal when you cook with wood. Ooni says the oven burns cleanly, with minimal smoke, once it runs at its best temperatures. The full wood method for how to light Ooni Karu 16 is in the Karu Essentials Guide PDF.
How to Light Ooni Karu 16 With Charcoal
Start with 2 to 3 pieces of lump charcoal and wait until it glows white with a red center, which means the oven is ready to cook.
Lump charcoal gives a steady base heat and burns down to a small amount of ash, which means less cleanup. Ooni does not recommend briquettes, because they block the holes in the grate and reduce airflow.
Follow these steps to light the charcoal.
- Place 2 to 3 pieces of lump charcoal on the grate.
- Light them with natural firestarters.
- Wait until the charcoal glows white with a red center. It is not ready while it is still black and producing smoke.
- Top up little and often, and leave room for airflow through the grate.
Ooni suggests combining the two fuels when you want both, and our Ooni Karu 16 charcoal guide goes deeper on that fuel. Charcoal holds a steady base temperature, and a few pieces of wood add a burst of heat and wood-fired flavor. If you are comparing this fuel flexibility with a propane-only oven, our Karu 16 and Arc XL matchup explains the trade-offs.
How to Light Ooni Karu 16 With the Gas Burner
With the Ooni Gas Burner fitted, push in the control knob, turn it anticlockwise until you hear a click, then hold it for 5 seconds.

The Gas Burner is designed to run on propane. Gas cooking must always be done with the door off, so you can watch the pizza cook. Check the hose, regulator and tank connections for leaks before every cook.
- Remove the rear vent cap and the burner, then fit the Gas Burner with its logo facing up.
- Remove the chimney and fit the chimney cap in its place.
- Push in the control knob, turn it slowly anticlockwise until it clicks, and hold it for 5 seconds.
- Adjust the flame with the control knob.
If you switch from solid fuel to gas during a cook, let Ooni Karu cool first before you attach the Gas Burner. If the gas does not light, Ooni directs you to the Gas Burner manual rather than a quick fix.
Flame Management Before You Cook
Once you know how to light Ooni Karu 16, the flame tells you when it is ready. A Neapolitan-style pizza needs real flame to cook in about 60 seconds, and that flame appears only after the fuel has burned through properly.
Ooni says a fuel tray that still looks full of unburned fuel means the oven is not ready. Build the fire up gradually with smaller pieces of kindling, and leave enough space for air to move through the grate.
Charcoal produces smaller flames than wood. If you are cooking with charcoal, Ooni suggests adding a small piece of kindling 2 to 3 minutes before you bake the pizza. Always give new fuel a couple of minutes to burn before you add food. For general fire tips with any oven, read how to light a wood-fired pizza oven.
Controlling Heat After Lighting
After how to light Ooni Karu 16 comes heat control: the oven runs at up to 932°F (500°C), as covered in Ooni Karu 16 temperature, and the chimney vent and fuel top-ups control how hot it gets.
| Fuel | Start with | Ready when | Heat range |
|---|---|---|---|
| Wood | 3 to 6 pieces of hardwood | Mostly embers, before the flames die down | Up to 932°F (500°C) |
| Charcoal | 2 to 3 pieces of lump charcoal | Glowing white with a red center | Up to 932°F (500°C) |
| Gas (propane) | Gas Burner with the door off | Lit after the knob clicks and is held for 5 seconds | 482 to 932°F (250 to 500°C) |
For Neapolitan-style pizza, Ooni aims for 752°F (400°C) at the center of the stone, measured with its infrared thermometer, before you launch the pizza. Closing the chimney vent lowers the heat and makes the oven smokier, which is useful when the pizza toppings cook faster than the base.
Ooni states that the oven is ready to start cooking in about 10 minutes. Treat that as a brand figure, because Ooni notes that its fuel temperatures are estimates that depend on weather and ambient temperature.
Common Mistakes When Lighting Ooni Karu 16
Most problems people have with how to light Ooni Karu 16 come from the wrong fuel, overfilling the grate, or cooking before the fire is ready.
- Using briquettes, which block the grate and cut airflow.
- Burning treated, painted, pine or spruce wood, which can taint your food.
- Overfilling the grate so fuel spills out, or leaving no room for airflow.
- Launching pizza before the fuel has burned through properly.
- Leaving the door on while cooking with the Gas Burner.
- Moving or cleaning the oven before it has cooled for at least one hour; see how to clean Ooni Karu 16 for the next step.
Frequently Asked Questions
Can I light Ooni Karu 16 without the Gas Burner?
Yes. Wood and charcoal light with natural firestarters, and wood can also be lit with a blowtorch. The Gas Burner is an optional accessory, and Ooni notes that it is available in some regions only.
How long does Ooni Karu 16 take to heat up?
Ooni states it is ready to start cooking in about 10 minutes. Real times depend on the fuel, the airflow and the weather, so check the oven with a thermometer before you cook.
Can I use briquettes instead of lump charcoal?
No. Ooni advises against briquettes because they block the holes in the grate. Use good quality lump charcoal instead.
Why is my Ooni Karu 16 not running hot enough?
Check that the chimney vent is open and the chimney cap is removed, since this gives maximum airflow and the highest temperatures. Ooni also recommends topping up fuel little and often.
What temperature should the stone reach before I cook pizza?
Ooni aims for 752°F (400°C) in the center of the stone for Neapolitan-style pizza. Use an infrared thermometer aimed at the middle of the stone to check it.
What is the maximum temperature for Ooni Karu 16?
Ooni designs the oven to run at up to 932°F (500°C). If it goes over that, stop adding fuel, or remove the hatch to bring the temperature down.
Learning how to light Ooni Karu 16 gets easier with every fire. Start small, let the fuel burn through, and give the oven time before you cook. If your manual lists different figures for your model, follow the manual, and check the Ooni Karu 16 dimensions before you choose a spot for the oven.
7 min readBy Use & ModelOoni Karu 16 Charcoal: How to Light, Heat and Refuel ItUpdated Nov 6, 2026
7 min readBy Use & ModelOoni Karu 12 Charcoal: How to Light and Cook With Lump CharcoalUpdated Nov 8, 2026
8 min readBy Use & ModelOoni Karu 16 Gas Burner: What It Is and How to Use It SafelyUpdated Nov 18, 2026
7 min readBy Use & ModelOoni Karu 2 Charcoal: Simple Fuel, Lighting and Heat GuideUpdated Nov 8, 2026
8 min readBy Use & ModelOoni Koda 16 Won’t Light? Fix It Step by StepUpdated Nov 10, 2026
7 min readBy Use & ModelHow to Light Ooni Karu 2 Safely: Fuel, Warm-Up and Safety RulesUpdated Nov 8, 2026