Ooni Fyra 12 Pizza Stone: How to Choose a Replacement
9 min read · by Hannah Cole · Last updated: November 10, 2026
The Ooni Fyra 12 pizza stone is a 13 x 13 inch cordierite baking board that sits inside the oven, and a replacement should match that size and its thickness. Cordierite is the stone material named in the reviews of this oven, so it is the first thing to check on any listing.
Buy an Ooni Fyra 12 pizza stone on size and thickness first, then confirm the listing names the Fyra 12 by name. Ooni’s spares page does not list a Fyra stone, so the listing and Ooni support are the two places to confirm fit before you pay.
| Stone option | Best for | Key check |
|---|---|---|
| Ooni-branded replacement | Buyers who want the maker’s own part | Listing names the Fyra 12 and gives the board size |
| Third-party cordierite board | Lower cost, when the size matches | Matches 13 x 13 inches and about 1 cm thickness |
| Stone listed for another Ooni model | Only if size and thickness match exactly | The model named on the listing, not the brand alone |
The stones below are third-party cordierite stones whose listings name the Fyra 12 or Ooni 12 ovens, at about 13 to 13.2 inches square. Their thickness is not stated in the titles, so compare it with the roughly 1 cm figure in this guide before you order.
13.2" Square Cordierite Pizza Stone for Ooni Koda
- Yuflame
- Prime
Pros & ConsViewHide
Reasons to buy
- Listing names both the Ooni Koda 12 and the Fyra 12
- Cordierite stone in a 13.2 in square size
- Rated 4.9 stars, though from only 17 reviews
Reasons to avoid
- Few reviews, so the rating is a thin sample
- Third-party stone: compare its thickness with the stone that came with your Fyra 12
13.2" Square Pizza Stone for Ooni Karu 12 Pizza
- Outspark
- 2.67 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Title names the Ooni Karu 12 and also the Koda 12 and Fyra 12
- 13.2 in square size listed in the title
- Rated 4.5 stars across 229 reviews at the time it was imported
Reasons to avoid
- Third-party stone, so confirm the thickness against your current stone
- Listing covers several ovens, so read the fit notes for your exact model
13" x 13" Square Pizza Stone for Ooni 12 Pizza
- Arborlily
- Prime
Pros & ConsViewHide
Reasons to buy
- Square 13 x 13 in stone sold for Ooni 12 ovens
- A lower-priced option among the stones compared
Reasons to avoid
- Only 28 reviews at the time it was imported, so less feedback to go on
- Generic listing for Ooni 12 ovens rather than one named model, so measure first
What Size Stone the Fyra 12 Uses
The Ooni Fyra 12 pizza stone is a 13 x 13 inch cordierite baking board, and it supports pizzas up to 12 inches across. Those are two different figures, and the stone size is the one that matters when you buy.
A Fireandsaw review of the Fyra 12 lists the stone at 13 x 13 inches and says it takes a pizza with a maximum diameter of 12 inches. A 12 inch pizza limit is a cooking limit, not a board size, so look for board dimensions on any listing you consider.

The same review says the Ooni Fyra 12 pizza stone is removable. The manual’s parts list also names it as item 3, after the main body and the door. You can lift it out along with the chimney and the fuel hopper to make the oven lighter, and our Ooni Fyra 12 dimensions guide has the wider size figures. That also makes it easy to measure the board you are replacing before you order anything.
How to Choose an Ooni Fyra 12 Pizza Stone
Match three things for any Ooni Fyra 12 pizza stone: the 13 x 13 inch size, a thickness near 1 cm, and cordierite as the material. Those are the specs the reviewed Fyra 12 stone is listed with, so they are the fastest way to rule out a poor fit.
Start with size. Compare the listed length and width of the board against 13 x 13 inches, and do not rely on the oven name in the title. A listing that gives only the oven name or a pizza size has not told you enough to confirm the part.
Next check thickness. A Tech Advisor review of the Fyra 12 gives the Ooni Fyra 12 pizza stone as a 1cm cordierite baking board. If a listing shows a different thickness, treat that as a reason to read the seller’s page again, not as a match.
Material matters too. Ask whether the Ooni Fyra 12 pizza stone replacement is cordierite, because a listing that says only “stone” or “ceramic” leaves the heat behaviour unclear. The checks below cover the basics in the order most buyers find useful.
- Board size: 13 x 13 inches, measured on the listing, not inferred from the pizza size.
- Thickness: about 1 cm, as listed for the Fyra 12 stone.
- Material: cordierite, named on the listing.
- Model: Fyra 12 named in the listing title or specifications.
If any one of the four is missing, pause the purchase and check with the seller. A quick measurement of the Ooni Fyra 12 pizza stone you remove, taken before you order, settles most doubts about size. Ask support to confirm the part name, the fit for your model and the stock status in one message.

How to Confirm a Replacement Stone Fits
Ooni’s spares page tells buyers to contact support for spare parts enquiries, and it does not list an Ooni Fyra 12 pizza stone. Support is the direct route to confirm that a replacement fits the oven you own, and our Ooni Fyra 12 parts guide covers the other spares.
Checked on the day of writing, the Ooni spares page names no Fyra-specific stone. Its accessory categories include pizza peels, oven covers and a rotating stone, but the rotating stone is a separate product from the baking board in the Fyra 12.
Before you contact support, have the oven model, the purchase date if you have it, and the measurements of the old board ready. Those details help the team answer with the right part instead of a guess.
Third-party Ooni Fyra 12 pizza stone listings are a separate question. Their names and thickness figures are seller claims. Read each Ooni Fyra 12 pizza stone listing against the 13 x 13 inch and 1 cm figures above, and skip any listing that does not give dimensions at all.
Heat, Cooling and Fuel Limits From the Manual
The Ooni Fyra 12 manual calls for 100% hardwood pellets, a cool-down of at least two hours, and no removal of ashes until the oven has cooled completely. Those three rules apply to the whole oven, including the Ooni Fyra 12 pizza stone inside it. The manual also says to keep the door on at all times during a cook, except when adding or removing food.
For fuel, the manual suggests starting with about 5 oz (150 g) of pellets, roughly two handfuls. Add pellets gradually and top the hopper up little and often. The manual warns that adding too many pellets enlarges the fire and risks damage to you or the oven.
Lighting is specific too. Use only firelighters that comply with EN 1860-3, and never spirit or petrol. The manual gives an approximate temperature range of 250 F (120 C) to 1000 F (550 C) when the oven is in use.
Cooling is the step people rush with an Ooni Fyra 12 pizza stone in the oven. The manual says the oven stays hot after visible flames die down, so allow at least 2 hours, and do not cover it straight after use. Make sure all fire and glowing embers have gone before you store it.
This guide does not cover cleaning the Ooni Fyra 12 pizza stone. The manual has a cleaning section for the pizza stone, but it was not read in this check, so follow the manual’s own steps for cleaning and do not treat the cooling advice above as cleaning advice. Our guide to cleaning the Ooni Fyra 12 covers the routine in more detail.
Common Mistakes With a Replacement Stone
The most common mistakes are buying on the oven name alone, skipping the size and thickness check, and removing ashes before the oven is cold. Each one has a clear fix from the manual or the listing itself.
- Buying by the oven name without a board size. A 12 inch pizza limit is not the stone size.
- Ignoring thickness. The reviewed Fyra 12 stone is about 1 cm.
- Removing ashes too soon. The manual says to wait until the oven has cooled completely.
- Using other fuel. The manual specifies 100% hardwood pellets, and not spirit or petrol for lighting.
If the stone has already cracked, read our guide to why a pizza stone cracks. Two habits help as well. Keep the oven outdoors and well clear of structures, as the manual’s safety section requires, and keep lighters and barbecue lighting fluid away from it, since the oven radiates heat in all directions.
What Is Not Verified
This guide has not confirmed current prices, which stores stock the official stone in your country, or the manual’s stone cleaning steps. Check those points before you buy.
Ooni’s Ooni Pizza Stone page for New Zealand says its 10 mm (0.4 in) stone is compatible with the Fyra, Koda 12, Volt and Volt 2, and lists it at 336 x 342 x 10 mm (13.2 x 13.5 x 0.4 in). That page is regional, so confirm the part and stock for your country with Ooni before you rely on it.
Prices and stock change often, so this guide does not list them. Check the current price and stock on the day you buy. Warranty terms for replacement parts were also not checked, so confirm them with the seller or with Ooni for your region.
Frequently Asked Questions
Can I use a steel or another stone instead?
This guide did not verify whether a steel or any other stone works in the Fyra 12. Measure the size and thickness first, and check the manual before you use anything other than the stone the oven was sold with.
Is the Ooni Fyra 12 pizza stone 12 inches?
No. The Fireandsaw review lists the stone at 13 x 13 inches and says it supports pizzas up to 12 inches in diameter. The pizza size and the board size are different figures, so compare the board size on any listing.
Does Ooni sell a replacement stone for the Fyra 12?
The Ooni spares page, as checked, does not list an Ooni Fyra 12 pizza stone and asks buyers to contact support for spare parts. Ooni’s New Zealand store does list a 10 mm stone that it says is compatible with the Fyra, so ask support to confirm the part for your country before you buy from a retailer.
How long should I wait before removing the ashes?
Wait until the oven has cooled completely. The manual says to allow at least two hours to cool and not to remove ashes until the fire has gone out and the oven is cold.
What fuel does the Fyra 12 use?
The manual specifies 100% hardwood pellets. It also says to light the oven only with firelighters that comply with EN 1860-3, and never with spirit or petrol.
Measure the stone you remove, compare it with 13 x 13 inches and about 1 cm, and confirm that the listing names the Fyra 12. If the listing is vague, ask Ooni support before you pay. A replacement Ooni Fyra 12 pizza stone that matches on size, thickness and material is a better buy than one that only matches on price.
8 min readGear & PantryOoni Karu 12 Pizza Stone: Replacement Guide and What to CheckUpdated Nov 10, 2026
8 min readGear & PantryOoni Koda 12 Pizza Stone: Size, Replacement Checklist and CareUpdated Nov 17, 2026
8 min readGear & PantryOoni Fyra 12 Pizza Peel: 4 Best Types ComparedUpdated Nov 10, 2026
8 min readGear & PantryOoni Koda 2 Pizza Stone: Best Replacement and 5 Fit ChecksUpdated Nov 10, 2026
8 min readGear & PantryOoni Koda 16 Pizza Stone: Replacement Options and What to CheckUpdated Nov 17, 2026
8 min readGear & PantryOoni Fyra 12 Cover: What Fits and What to Check Before You BuyUpdated Nov 11, 2026