Ooni Koda 16 Pizza Stone: Replacement Options and What to Check
8 min read · by Hannah Cole · Last updated: November 17, 2026
The Ooni Koda 16 pizza stone is a custom-made 15 mm cordierite baking board, so any replacement needs to match that model and size. Official replacements and third-party boards both exist, and the model name matters more than the brand on the box.
Propane ovens get very hot and must be used outdoors. Follow the Ooni Koda 16 safety manual and the Essentials Guide, and treat this article as general information rather than a repair guide.
| Option | Best for | Key fact |
|---|---|---|
| Official Ooni baking stone | Owners who want a stone made for the Koda 16 | Ooni lists a baking stone for the Koda 16 |
| Third-party cordierite board | Buyers who compare size and thickness closely | Listings often describe size and model, so check both |
| Pizza steel | Cooks who want a different baking surface | Steel is one of the materials used for pizza stones |
Cordierite Pizza Stone for Ooni Koda 16 Pizza Oven
- Saf Bbcue
- 5.97 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Listing names the Ooni Koda 16
- T-shaped 20.5 x 16.7 in board, 0.6 in thick (about 15 mm)
- 85% of its Amazon ratings are 5-star
Reasons to avoid
- Only about 46 Amazon ratings
- Seller tells buyers to confirm compatibility before purchase
Pizza Stones Replacement Parts for Ooni Koda 16
- bbq777
- 5.78 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Listing names the Ooni Koda 16 gas oven
- T-shaped cordierite board, 0.6 in thick (about 15 mm)
- Solid piece rather than a set of tiles
Reasons to avoid
- About 43 Amazon ratings, a small sample
- Third-party board, not made by Ooni
Ooni Koda 16 Pizza Stone: Material and Size
The Koda 16 uses a custom-made 15 mm thick cordierite baking board, according to Ooni’s Koda 16 Essentials Guide. An Ooni Koda 16 pizza stone is built to hold heat, so a replacement should match the original thickness.
Ooni designs the oven to run at up to 950°F (500°C). If it goes higher, switch off the flame and let the oven cool before you touch anything. The guide also warns that the Ooni Koda 16 pizza stone gets hotter closer to the flame, because the Koda 16 has an L-shaped burner.
For Neapolitan-style pizza, Ooni aims for at least 750°F (400°C) at the middle of the stone. You can check that spot with an infrared thermometer for pizza ovens before you launch a pizza.
The stone is only one part of a safe setup. Ooni’s guide asks for a spot at least 3 ft (1 m) away from buildings and structures, on a surface that can hold 66 lb (30 kg) or more, and our guide to a table for the Ooni Koda 16 helps if you need a stand. It also advises covering the oven after use, and a cover for the Ooni Koda 16 is an easy way to do that. In strong wind, heavy rain or snow, bring the oven inside.
| Setting | Value |
|---|---|
| Stone type and thickness | Custom-made cordierite, 15 mm thick |
| Design maximum | 950°F (500°C) |
| Neapolitan target at the stone | At least 750°F (400°C) |
Official or Third-Party Ooni Koda 16 Pizza Stone
Choose a replacement by model name and size first, because the Koda 16 pizza stone is not the same part as the stone for other Ooni ovens. Ooni sells an official Koda 16 pizza stone, and its price and stock change by region, so check the official store for your country before you buy.

Third-party cordierite boards sold as an Ooni Koda 16 pizza stone substitute are common too, and the two boards shown near the top of this page are examples whose listings name the Koda 16. Both describe a T-shaped cordierite board about 0.6 in thick, close to the 15 mm of the original. Listings often describe size and thickness, so compare those numbers with the 15 mm spec above. A board that does not name the Koda 16 is a guess, not a fit.
| Check | Why it matters |
|---|---|
| Model name | The listing should name the Koda 16, not a different Ooni model |
| Thickness | Ooni’s original board is 15 mm thick |
| Size | The board has to sit on the baking surface without touching the walls |
| Heat rating | The oven runs up to 950°F, so a seller’s heat rating should cover that |
The Ooni Koda 16 pizza oven is a 16-inch oven, and Ooni describes it as handling larger pizzas with ease thanks to its heat-retaining baking stone and thick insulation. A board that is too small leaves part of that surface unused, so the size check matters as much as the material.
The Karu 16 stones are made for a different model. Their names look close to the Koda 16 listing, so read the fitment line before you add anything to your cart.

Pizza Steel as an Alternative to a Pizza Stone
A pizza steel can replace the Ooni Koda 16 pizza stone if you want a different baking surface, but it is a separate purchase from the stone and the guide does not cover it. Pizza stones are made from several materials, and Wikipedia lists ceramic, stone and salt, with some made of steel. Our guide to pizza steels shows how steel compares with stone.

Before you buy a steel for the Koda 16, check these points:
- Confirm the steel fits the Koda 16 baking area with room to slide a peel in and out.
- Plan for weight, since a steel is heavier to lift in and out of a hot oven than a stone.
- Ask Ooni support whether a steel is supported for the Koda 16, because the Essentials Guide does not say.
- Keep the official Ooni Koda 16 pizza stone as the default choice until you have that answer.
Caring for a Replacement Ooni Koda 16 Pizza Stone
Heat and cool the Ooni Koda 16 pizza stone gradually, because sudden temperature changes are the main risk. Tasting Table advises putting the stone in before you preheat, then raising the heat in steps of 100 to 200°F, and letting the stone cool slowly in the oven rather than in water. Wikipedia notes that some bakers place the stone in a cold oven and heat it over at least 45 minutes.
Let the Koda 16 cool for at least 1.5 hours before you move or clean the stone, according to Ooni’s guide. Cracks in an Ooni Koda 16 pizza stone usually come from thermal shock, trapped moisture or oil, or rough handling.
- Turn off the gas at the control knob and detach the regulator from the propane tank.
- Wait at least 1.5 hours, and until the stone is completely cool before you handle it.
- Brush off excess flour with an Ooni brush, then flip the brush to scrape away fallen food.
- Never put water on the oven to cool it, and keep the stone out of the dishwasher, since it is not dishwasher safe.
- Store the Ooni Koda 16 pizza stone in a dry place, because the guide recommends dry storage for best performance.
Keep the Ooni Koda 16 pizza stone away from moisture and grease. Wikipedia notes that a porous stone absorbs liquid, and Tasting Table advises dabbing grease with a damp cloth instead of washing the stone by submersion. Wikipedia also advises against leaving a stone in an oven on self-clean mode, and Tasting Table recommends letting frozen pizza reach room temperature before it goes on a hot stone.
Storage matters too. Ooni recommends keeping the stone in a dry environment for optimal performance, so a damp shed or a wet patio is a poor place to keep a spare replacement.
If the stone runs too hot, place a piece of Ooni cast iron in the oven to draw some heat out. Thermal shock is the sudden stress caused by a fast temperature change, and it is one reason stones crack, as the thermal shock definition explains.
Frequently Asked Questions
Is the official Ooni Koda 16 pizza stone the only option?
No. Third-party cordierite boards are sold as well. The safe test is simple: the listing should name the Koda 16, state a 15 mm thickness or a close match, and give a size that fits your oven. If any of those is missing, pick the official stone instead.
Can I pour water on the stone to cool it down?
No. Ooni says not to apply water to any part of the Koda 16 to extinguish or cool it, because this can cause damage and injury. Let the oven cool by itself, and wait until the Ooni Koda 16 pizza stone is completely cool before you move it.
Is the stone dishwasher safe?
No. Ooni’s guide says the stone baking board is not dishwasher safe. Brush the Ooni Koda 16 pizza stone with the Ooni brush and scrape away stuck food once the oven has cooled.
Should I preheat the stone with the oven?
Yes. Tasting Table advises placing the stone in the oven before preheating, so it heats with the oven and not all at once. On the Koda 16, keep the flame at a level you can watch, and let the Ooni Koda 16 pizza stone reach the target before you launch a pizza.
What temperature should the stone reach before baking?
For Neapolitan-style pizza, Ooni aims for at least 750°F (400°C) at the middle of the Ooni Koda 16 pizza stone. Use an infrared thermometer aimed at that spot, and never plan a cook above the 950°F (500°C) design maximum.
Can I cook other foods on the Ooni Koda 16 pizza stone?
Yes, within the oven’s limits. Ooni’s Essentials Guide lists steaks, roasted vegetables and breads alongside pizza, so the stone is not only for pizza. Keep the 950°F (500°C) design maximum in mind, and let the stone cool before you handle it.
Before you buy any Ooni Koda 16 pizza stone, confirm the model name, the 15 mm thickness and the size on the listing. If the listing does not name the Koda 16, skip it. A correct fit is the simplest way to avoid a board that was never designed for your oven.
8 min readGear & PantryOoni Koda 2 Pizza Stone: Best Replacement and 5 Fit ChecksUpdated Nov 10, 2026
8 min readGear & PantryOoni Koda 12 Pizza Stone: Size, Replacement Checklist and CareUpdated Nov 17, 2026
7 min readGear & PantryOoni Koda 16 Table: Best Options ComparedUpdated Nov 17, 2026
8 min readGear & PantryOoni Karu 12 Pizza Stone: Replacement Guide and What to CheckUpdated Nov 10, 2026
8 min readGear & PantryOoni Karu 16 Replacement Stone: Fit, Size and Care GuideUpdated Nov 10, 2026
8 min readGear & PantryBest Table for Ooni Koda 2 Pro: Which Options Fit and What to CheckUpdated Nov 10, 2026