Ninja Woodfire Pizza Oven Cover: 4 Fit and Size Checks
6 min read · by Hannah Cole · Last updated: November 15, 2026
A Ninja Woodfire pizza oven cover keeps rain, dust and debris off the oven when it is not cooking. The right cover depends on the exact model: retailer listings give different dimensions and list different compatible models, so measure your oven and confirm the model number before you buy. The cover is meant for storage, and it should go on only after the oven has cooled.
Why the Ninja Woodfire pizza oven cover sizes do not agree
Ninja’s Woodfire outdoor oven cover is sold under several model numbers, including XSKOCVR in the US and XSKOOVNCVR and XSKOCVREUK in other regions. The sizes listed for the cover vary by retailer and by region, so the same product can appear with different measurements.

Across the listings reviewed, the US figures run from about 18.9 by 17.9 by 15.2 inches to 21.5 by 17.7 by 15.0 inches, and one listing gives 24.4 by 16.1 by 23.6 inches. Metric listings for other regions show a depth near 546 millimetres, a height near 381 millimetres and a width near 450 millimetres. Because these figures do not match, use them as a rough guide only and check your own oven’s measurements.
Compatibility also differs. Some listings say the cover is built for the Woodfire Outdoor Oven OO100 series, while others name the OO101. Read the label on the oven and on the cover, and buy only if the model matches. A cover sized for the wrong model can leave gaps that let in rain.
Fit, material and weather protection
The covers described in these listings use a weather-resistant fabric with adjustable drawstrings at the front and back and elastic sides for a snug fit. A snug fit matters: a loose cover flaps in wind and lets water run under the edge. For the general checklist, read pizza oven cover basics.
- Measure the oven’s height, width and depth, including the handle and the gas fitting.
- Compare with the cover’s listed size and allow a little slack for the drawstring to close.
- Check the fabric: listings describe the material as polyester with UV inhibitors in some cases and 100% nylon in others, so read the tag on the product you buy.
- Look for a cover that closes at the base so wind cannot lift it off.
Weather-resistant does not mean sealed. Water can still get in at the vents or under a loose edge. If you live where storms are frequent, store the oven in a dry, covered spot as well as using the cover.

When to cover the oven
Cover the oven only when it is cool and not in use. One retailer listing says the cover is for storage protection and should be fitted only when the oven is cool. It is not designed to stay on during cooking, or while the oven still holds heat after use. Ninja’s other outdoor oven has its own notes in the cover guide for the Ninja Artisan.
Never leave the cover on during a cook or right after one. A fabric cover near heat and flame is a fire hazard. Keep the propane tank and hose clear of the cover, and check the hose for cuts or wear before the next use. For longer storage over winter, move the oven and cover into a dry space.
How to measure the oven for a cover
Measure the oven with its door and lid closed and the oven sitting on a level surface. Take the height from the base to the top, the width at the widest point, and the depth from front to back. Include the gas fitting and any feet that raise the body, because they affect whether the cover sits flat at the base. To see what you are protecting, read the Ninja Woodfire oven review.
Write the three numbers down and compare them with each listing. Note the model number each listing names, since the same cover can be sold for different models in different regions. If the listing does not name your model, ask the seller before you order rather than guessing from the photo.
Checking the cover before you buy
Elastic sides are meant to hold the cover snug against the body, and the drawstrings at the front and back let you tighten the base so wind does not lift it. Check that both features are present on the product you buy, and that the fabric tag matches the material described in the listing.
Check the seller’s return policy as well. If the fit is wrong, a return is the simplest fix. After a season of outdoor use, inspect the fabric for fading, cracks, or mould, and replace the cover when it no longer keeps rain out at the seams or vents.
Storing the oven and cover between seasons
Storage is where a cover earns its keep. Before the oven goes away for winter, let it cool fully, brush out any ash or crumbs from the cooking area, and wipe the outside with a dry cloth. A damp oven under a cover can grow mould in the fabric and leave rust spots on the metal, so check that the oven is dry before the cover goes on.
Keep the cover in a dry place when the oven is not in use for long periods. Hanging it or folding it loosely prevents creases that can weaken the seams. Store the propane tank upright and separately, away from direct sun and heat, and keep the hose loosely coiled so it is not kinked. Inspect the hose and the cover again before the first cook of the new season.
Frequently Asked Questions
Which Ninja Woodfire model does this cover fit?
Listings name the OO100 series and the OO101 in different places. Read the model number on your oven and the cover, and buy only when they match. If the listing does not name your model, ask the seller before you order.
Can I leave the cover on while the oven is cooking?
No. The cover is meant for storage protection and should be fitted only when the oven is cool. Covering a hot or lit oven is a fire risk.
Is the cover fully waterproof?
The listings describe it as weather-resistant. Water can still enter through vents or under a loose edge, so keep the oven dry where possible and store it indoors during long wet spells.
Why does the cover size differ between sellers?
Sellers list the cover under different model numbers and regional versions, and some measure the packed product rather than the fitted size. Compare the dimensions with your oven and not with the listing title alone.
Measure your oven, match the model number, and check the fabric before buying. Cover the oven only after it has cooled, and store it dry. A cover that fits well is the simplest way to keep the oven ready for the next pizza night.
9 min readGear & PantryNinja Woodfire Pizza Oven Stand: Best Table Options for 2026Updated Nov 17, 2026
9 min readGear & PantryBest Ninja Artisan Pizza Oven Covers: What to Check Before You BuyUpdated Nov 11, 2026
9 min readGear & PantryHow to Choose a Pizza Stone Size That Fits Your OvenUpdated Nov 11, 2026
6 min readGear & PantryCuisinart 3 in 1 Pizza Oven Cover: Fit and Weather GuideUpdated Nov 15, 2026
6 min readGear & PantryOoni Volt 12 Cover: Size, Fit and Storage GuideUpdated Nov 15, 2026
9 min readGear & PantryPizza Oven Brush Guide: 4 Easy Bristle Types ComparedUpdated Nov 10, 2026