How Long Does Ooni Koda 2 Take to Heat Up? Official Timing
7 min read · by Arjun Mehta · Last updated: November 7, 2026
How long does Ooni Koda 2 take to heat up? Ooni’s answer is about 20 minutes to reach 400°C (750°F). The Koda 2 is a 14-inch gas model (see the Ooni Koda 2 dimensions) with a top temperature of 500°C (950°F). Cold weather and wind can add time, so check the stone itself.
Use 20 minutes as a mild-day starting point. Cold air, wind and a damp stone can all push the time up, and the sections below show how to check the stone before you cook.
The Koda 2 runs on gas, so follow the Ooni manual for fuel connection, lighting and safe placement.
Ooni Koda 2 Heat-Up Time at a Glance
The Ooni Koda 2 is ready to cook in about 20 minutes at 400°C (750°F), and it reaches a maximum of 500°C (950°F), according to Ooni.

| Setting | Ooni figure |
|---|---|
| Ready to cook | About 20 minutes, at 400°C (750°F) |
| Maximum temperature | 500°C (950°F) |
| Stone reheat speed | 20% faster than previous Koda models |
| Pizza cook time | About 60 seconds (Ooni claim) |
Ooni’s Koda 2 launch article is the source for the 20-minute and 500°C figures. It does not give a separate heat-up time for the stone, so the stone’s reading is the number to watch.
Steps to Light and Preheat the Koda 2
To heat the Koda 2, slide in the baking stone, connect the fuel supply and use the electric spark ignition, then wait for the stone to reach 400°C (750°F). For the Max model’s setup and safe-use steps, see what Ooni’s Koda 2 Max manual says.
- Slide the baking stone into the oven.
- Connect the gas fuel source, following the Ooni Koda 2 instructions.
- Press the electric spark ignition to light the burner.
- Set the burner as the manual directs.
- Check the stone with an infrared thermometer after about 15 minutes, then every few minutes until it reads 400°C.
Ooni describes the Koda 2 as gas-powered. Its launch article does not name a specific fuel, so check the manual for the fuel your model uses, and do not change the fuel type yourself. The Ooni Koda 2 natural gas page explains that option.
What Changes the Heat-Up Time
Air temperature, wind and the stone’s moisture all change how long the Koda 2 takes, so 20 minutes is a mild-day figure rather than a fixed time.
- Air temperature: Ooni’s cold-weather guide says a cold oven needs more time to preheat.
- Stone moisture: one reviewer notes that moisture can change heat-up time, though the test did not measure it. Ooni advises starting with a dry, warm stone.
- Fuel type: Ooni says preheat time depends on the fuel type.
- Model: the Koda 2 Pro and Koda 2 Max are separate models, so this timing does not apply to them; see Ooni Koda 2 Pro temperature and Ooni Koda 2 Max temperature for those.
How Long Does Ooni Koda 2 Take to Heat Up in Cold Weather and Wind
In one reviewer’s cold test at 2°C with snow on the oven, the Koda 2 reached 400°C after 25 minutes, and Ooni says snow adds preheat time without stopping the oven.
| Condition | Reported time or guidance |
|---|---|
| Mild day, Ooni claim | About 20 minutes to 400°C (750°F) |
| 2°C with snow on the oven, one reviewer | 400°C after 25 minutes |
| Same test, peak reading | About 450°C after 35 minutes |
| Ooni cold-weather guide | At least 15 minutes, and at most 25 to 30 minutes, depending on fuel type |
Ooni’s cold-weather preheat guide gives the 15 to 30 minute range. The reviewer’s 25 and 35 minute figures come from one test on one day, so treat them as a single user report rather than a fixed rule.
Wind is the other factor. One reviewer reports the flame went out a few times in strong wind, so the oven’s position matters. Shelter it from gusts and check the flame before you load a pizza.
How to Tell the Stone Is Ready
Use an infrared thermometer on the stone, because Ooni says it is the only way to be sure you have reached the right temperature.

- Aim the infrared thermometer at the center of the stone.
- Wait until it reads about 400°C (750°F), the ready-to-cook figure Ooni gives.
- Keep the reading below 500°C (950°F), the maximum Ooni lists.
- If the reading stops rising, check that the flame is still lit and the oven is sheltered from wind.
If you want a live reading, the Koda 2 is compatible with the Ooni Connect Digital Temperature Hub, which is sold separately and lets you monitor temperatures inside the oven. Ooni notes that the hub does not control the oven, so it replaces neither the infrared check nor your attention at the flame.
Ooni recommends starting with a dry, warm stone in any weather.
Reheating the Stone Between Pizzas
Ooni says the Koda 2 stone reheats 20% faster than previous Koda models, but it gives no absolute time, so check the thermometer before each pizza.
- Reheat: the stone reheats 20% faster than earlier Koda models, according to Ooni.
- Cook time: Ooni claims a pizza cooks in about 60 seconds at full temperature.
- Check: read the stone again before each pizza, because no reheat time is given.
Ooni credits its G2 Gas Technology, with a tapered flame design, for fewer stone temperature swings than previous Koda models, which is also why back-to-back pizzas recover faster. The 14-inch stone flares out an extra two inches at the mouth, which gives you more room to launch. Keep the stone dry between sessions, since Ooni’s advice is to start with a dry, warm stone. Cleaning ash from the stone is a separate job that helps keep that starting point consistent.
Frequently Asked Questions
Does the Ooni Koda 2 need the full 20 minutes every time?
Ooni’s 20-minute figure answers how long does Ooni Koda 2 take to heat up from a cold start, reaching 400°C (750°F). Whether you need the full wait depends on the air temperature, the wind and the stone. An infrared thermometer shows when the stone is ready, so check it instead of relying on the clock alone.
What is the maximum temperature of the Ooni Koda 2?
Ooni lists the maximum at 500°C (950°F). Its ready-to-cook figure is 400°C (750°F), so that is the target most cooks need to reach before loading a pizza.
Can I use the Ooni Koda 2 in snow?
Ooni says snow does not stop the oven from working, but it needs more time to preheat. One reviewer’s test at 2°C with snow on the oven reached 400°C after 25 minutes, so check the stone with a thermometer before you cook.
Does wind affect heat-up on the Koda 2?
One reviewer reports the flame went out in strong wind on a few occasions and says positioning matters. Shelter the oven from gusts, then check that the flame is still lit before you load a pizza.
Does the Ooni Koda 2 run on gas?
Yes. Ooni describes the Koda 2 as gas-powered, with electric spark ignition. Connect the fuel source as the manual says, and do not convert the oven to a different fuel.
How long should I wait between pizzas?
Ooni says the stone reheats 20% faster than previous Koda models but gives no absolute time. Check the stone with a thermometer before each pizza rather than waiting a fixed number of minutes.
How long does a pizza take to cook?
Ooni claims a pizza cooks in about 60 seconds at full temperature. Results vary with the dough, the toppings and the stone’s temperature, so watch the first pizza closely.
Plan around the thermometer, not the clock. Start with Ooni’s 20-minute figure on a mild day, the usual answer to how long does Ooni Koda 2 take to heat up, add time in the cold, and do not load a pizza until the stone reads about 400°C (750°F). Read the manual before the first use, and again after any change in fuel.
7 min readBy Use & ModelHow Long Does Ooni Karu 12 Take to Heat Up? Official FiguresUpdated Nov 8, 2026
10 min readBy Use & ModelOoni Koda 2 Max Manual: What the Official Guide SaysUpdated Nov 6, 2026
9 min readBy Use & ModelOoni Koda 2 Pro Temperature: Max Heat and How to Check ItUpdated Nov 7, 2026
8 min readBy Use & ModelOoni Koda 2 Max Temperature: Max Heat, Preheat Time and Stone ChecksUpdated Nov 7, 2026
9 min readBy Use & ModelHow Long Does a Propane Tank Last in a Pizza Oven?Updated Nov 11, 2026
7 min readBy Use & ModelOoni Fyra 12 Temperature: Max Heat, Heat-Up Time and ControlUpdated Nov 7, 2026