Imperia Pasta Machine Attachments: Cutter Sizes and Fit Guide
8 min read · by Arjun Mehta · Last updated: November 15, 2026
Imperia pasta machine attachments are cutter accessories that lock onto the sheeter and turn a rolled sheet of dough into a finished shape. They cover thin strands, flat ribbons and wide noodles, and each cutter is built for one width. The model code on your machine decides which attachments you can use.
Not every one of the Imperia pasta machine attachments fits every sheeter, so check the model code before you choose a shape. Imperia’s official manuals list the cutter widths and the model codes they cover, and those are the sources to check first.
Imperia IPasta Classic Pasta Maker
- Imperia
- 3.7 g
- Prime
Pros & ConsViewHide
Reasons to buy
- Made in Italy with chromed steel cutting rollers
- Makes 150 mm sheets, 6.5 mm fettuccine and 2 mm tagliolini
- Six roller thickness settings from 0.5 mm to 5 mm
- Clamp slot accepts a separate motor
Reasons to avoid
- Manual crank, so you turn it for every pass
- Only three cut widths in the box
- Motor is a separate purchase
Imperia Pasta Maker Machine- 100% Made in Italy
- Imperia
- 3.66 kg
Pros & ConsViewHide
Reasons to buy
- Chromed steel rollers make sheets up to 150 mm wide
- Cuts fettuccine (6.5 mm) and tagliolini (2 mm)
- Six roller heights from 0.5 to 5 mm
Reasons to avoid
- Manual hand crank
- Two cut widths only, no extruded shapes
- The optional motor is a separate purchase
What Are Imperia Pasta Machine Attachments?
Imperia pasta machine attachments are interchangeable cutters that fit onto the sheeter and cut the rolled dough into strands or strips. Each one turns the sheet into its shape as the dough passes through the cutting rollers.

The manual describes mounting Imperia pasta machine attachments by pressing each one onto the sheeter until it locks. The sheeter is the manual machine with the rollers and the crank. The manual repeats the mounting step for every accessory the sheeter may have, so you fit one cutter at a time.
Some sets bundle extra pieces. The Titania manual’s gift page says one box includes a heart-shaped ravioli attachment (Raviolamp cuoricini) and a pasta drying rack (Stendipasta) with the machine. Because each cutter is made for one width, the cut you get depends on the cutter you mount. The manual also asks you to clamp the sheeter to a stable surface before you start.
Find Your Model Code First
Imperia publishes seven user manuals, and each one lists the model codes it covers. The code on your machine tells you which manual applies, so start there before you buy an attachment.
- 1238 manual: 22 model codes, from 3100 to 5540
- Titania manual: 2190, 2675 and 2695
- Restaurant Manuale: 10, 5010 and 6010
- Restaurant Elettrica: 36, 38 and 6036
- Restaurant Elettronica: 46 and 48
- Pasta Presto: 12 model codes, from 3700 to 5723
- PastaFacile: 2675, 3600, 3650, 4600, 4620, 4650 and 4660
Four codes appear in more than one manual: 2675, 3650, 4650 and 4660. If your code is one of these, read both entries before you assume the Imperia pasta machine attachments fit. You can find all seven manuals on Imperia’s instruction manual page.
Cutter Sizes in the Official Manual
The 1238 manual lists ten cutter widths, from 0.8 mm Capelli d’Angelo to 44 mm Reginette, and it is the best list to check your own Imperia pasta machine attachments against. The list appears under the heading for cutting accessories in the manual.

The table below copies the cut names and widths from the 1238 user manual (PDF). The 1238 manual covers one family of machines, so compare it with the manual for your own model code.
| Cut | Width |
|---|---|
| Capelli d’Angelo | 0.8 mm |
| Capelli d’Angelo | 1.5 mm |
| Spaghetti | 2 mm (diameter) |
| Tagliatelle | 2 mm |
| Trenette | 4 mm |
| Fettuccine | 6.5 mm |
| Lasagnette | 12 mm |
| Reginette lasagnette | 12 mm |
| Pappardelle | 32 mm |
| Reginette pappardelle | 44 mm |
Not every cut needs extra Imperia pasta machine attachments. The Titania manual says its machine body has built-in cutters for 2 mm Tagliatelle and 6.5 mm Fettuccine, so those two cuts come with the sheeter itself. Its cutting accessories page lists a Spaghetti attachment at 2 mm diameter and a Reginette lasagnette attachment at 12 mm.
Thin strands
The two Capelli d’Angelo cutters at 0.8 mm and 1.5 mm make the finest strands in the list. The 2 mm Spaghetti and Tagliatelle cutters make the next step up, and they suit the same kind of dough pass.
Flat ribbons
Trenette at 4 mm and Fettuccine at 6.5 mm cover the flat ribbons. Lasagnette and Reginette lasagnette, both at 12 mm, give a wider flat cut for baked dishes and short noodles.
Wide noodles
Pappardelle at 32 mm and Reginette pappardelle at 44 mm are the widest cuts in the list. Their width makes them a different kind of noodle from the thin strands above.
How to Fit and Use an Attachment
You lock each of the Imperia pasta machine attachments onto the sheeter by pressing its tabs against the sheeter’s tabs, then drive the cutter with the crank. The steps below follow the mounting and cutting sequence in the 1238 manual, and our guide to using an Imperia pasta machine covers the rolling steps before it.
- Clamp the sheeter to the edge of a stable table, using the clamp and screw, until it does not move.
- Line up the retaining tabs on the sheeter with the tabs on the cutter, then press down with light pressure until the attachment locks in place.
- Take the crank off the sheeter and insert it into the drive hole on the cutter.
- Lay one end of the sheet on the cutting rollers.
- Turn the crank clockwise and collect the cut dough as it comes out.
Before the real batch, the manual’s cleaning section asks you to pass a small piece of dough through the rollers and cutters to clear any dust. Throw that piece away after the pass.

Fit, Compatibility and Spare Parts
The manual says the manufacturer is not responsible when a non-original spare part or a part not made for the model is used. The Titania manual uses the same wording on unauthorized or improper spare parts. Match each attachment to your model code before you buy, and do not assume that a part fits because it looks similar.
- Find the model code on the machine and in the matching manual.
- Compare the cutter width in the manual with the cutter you are considering.
- Ask the seller which model code the cutter is made for, and keep the receipt.
Retailer listings often name the sheeter families a cutter fits. Those claims are not a substitute for Imperia’s manual, so treat them as a starting point. Similar-looking machines can still use different dies, so the look of a sheeter does not prove that a cutter will fit.
Cleaning Imperia Pasta Machine Attachments Safely
Imperia says to clean its attachments with a dry cloth or a soft brush, and never to wash them in a dishwasher or under water. The manual calls cleaning the only routine maintenance the machine needs, and the wider routine is in our notes on cleaning a pasta machine.
- Brush the cutter with a dry cloth or soft brush before each use.
- After use, remove dough residue with a soft brush. The manual forbids scraping with a hard object.
- Dry every part completely before you store it, as the manual asks.
Clean the Imperia pasta machine attachments straight after use. Dough left in the cutting rollers dries hard and is harder to remove later.
Choosing Imperia Pasta Machine Attachments
Choose the cut your recipe needs, then check the sheet width and the model code before you order. The 1238 manual gives the figures below for its own machine.
- Shape: thin strands run from 0.8 to 2 mm, flat ribbons from 4 to 12 mm, and wide noodles from 32 to 44 mm.
- Sheet width: the 1238 manual gives a maximum sheet width of 150 mm, and the Titania manual gives 140 mm, so plan each pass around the limit in your own manual and check how thin to roll pasta for the cut you want.
- Roller opening: the manual gives an adjustment range of 0.2 to 2.2 mm for the rollers before the cutter.
- Model code: match the attachment to the code printed in the matching manual.
These figures come from one manual’s technical sheet, so confirm them for your own machine before you rely on them. The two Imperia manuals also differ in size: the Titania sheet is 130 x 180 x 205 mm and weighs 2.900 kg, while the 1238 sheet is 160 x 185 x 205 mm and weighs 3.450 kg. See our Imperia pasta machine review for the machine itself, or read the Titania user manual (PDF) if your machine is a Titania.
Frequently Asked Questions
Can I use more than one Imperia attachment on the same sheeter?
The manual describes mounting one attachment at a time, and it repeats the step for each accessory the sheeter may have. Check your model’s manual for the full list of Imperia pasta machine attachments it accepts.
What is the thinnest cut in the official list?
The thinnest cut in the 1238 manual list is Capelli d’Angelo at 0.8 mm, and the 1.5 mm version is the next finest.
Are Titania and 1238 Imperia pasta machine attachments the same?
Not necessarily. The two manuals give different sheet widths, 140 mm for Titania and 150 mm for the 1238 family, and the Titania machine has built-in 2 mm and 6.5 mm cutters. Check the model code before you assume a match.
Are Imperia pasta machine attachments dishwasher safe?
No. The manual says never to wash any part of the sheeter or its accessories in a dishwasher, under water jets or with detergent.
Do non-original Imperia pasta machine attachments affect manufacturer responsibility?
The manual says the manufacturer is not liable when non-original spare parts or parts not specific to the model are used. Check the warranty terms from the seller you bought from.
How do I find out which Imperia pasta machine attachments fit my machine?
Find the model code on your machine, open the matching manual on Imperia’s instruction manual page, and check the Imperia pasta machine attachments listed for that model.
Start with the model code, then pick the cut from the manual’s list and keep the mounting and cleaning steps in mind. If a part is missing or unclear, contact the seller with your model code before you buy, since a part made for another model will not fit.
8 min readBy Use & ModelImperia Pasta Machine Ravioli: Attachments, Sheets and SealingUpdated Nov 10, 2026
8 min readBy Use & ModelMarcato Atlas 150 Attachments: Which Cutter Shapes FitUpdated Nov 8, 2026
8 min readBy Use & ModelImperia Pasta Machine Parts: A Simple Guide for 2026Updated Nov 8, 2026
8 min readBy Use & ModelHow to Clean Imperia Pasta MachineUpdated Nov 8, 2026
8 min readBy Use & ModelHow to Use Imperia Pasta Machine: Setup, Thickness and CuttingUpdated Nov 6, 2026
7 min readBy Use & ModelKitchenAid Bowl Lift Attachments: Which Pasta Tools Fit Your MixerUpdated Nov 7, 2026