Marcato Atlas 150 Attachments: Which Cutter Shapes Fit
8 min read · by Arjun Mehta · Last updated: November 8, 2026
The Marcato Atlas 150 attachments are its cutter shapes and the Pastadrive motor, and the instruction booklet lists each cutter with its width, its cut size and the recommended regulator setting. Read the table before you buy a cutter, because the booklet marks some shapes as not suited to the motor.
Four of the listed cutters cannot be used with the Pastadrive motor, so motor owners should check the table first. The booklet does not say whether these shapes fit the Atlas 180.
Marcato Atlas 150 Attachments: What Counts
Attachments are the cutter shapes and the motor that work with the Atlas 150, and the booklet’s box list names no cutter shapes at all.

The box list for the Atlas 150 includes the machine body, crank, clamp and instruction manual. It adds the Atlas Slide only on Atlas Slide models, and the Pastadrive motor with its power cord only on Atlasmotor and Ampiamotor models. Because cutter shapes are not in that list, check what your set includes before you assume a shape is in the box.
Cutter Shapes for Marcato Atlas 150 Attachments
The booklet lists fifteen cutter shapes for the Atlas 150, each 150 mm wide, with a cut size and a recommended regulator setting for each one.
The booklet text calls them 12 extra cutting accessories, yet its table has fifteen rows, and the booklet does not explain the gap. The table below follows the rows as printed. Where the booklet marks a cut size with ø, the figure is a diameter, as with vermicelli, spaghetti and bigoli. The full text is in Marcato’s Atlas and Ampia booklet.
| Cutter shape | Width | Cut size | Regulator | Pastadrive motor |
|---|---|---|---|---|
| Vermicelli | 150 mm | 1 mm diameter | 5 | Usable |
| Spaghetti | 150 mm | 2 mm diameter | 4 | Usable |
| Bigoli | 150 mm | 3.5 mm diameter | 2 | Usable |
| Linguine | 150 mm | 3 mm | 4 | Usable |
| Capellini | 150 mm | 1 mm | 8 to 9 | Usable |
| Spaghetti chitarra | 150 mm | 2 mm | 4 | Usable |
| Trenette | 150 mm | 3.5 mm | 6 to 7 | Usable |
| Lasagnette | 150 mm | 10 mm | 6 to 9 | Usable |
| Mafaldine | 150 mm | 8 mm | 6 | Not usable |
| Reginette | 150 mm | 12 mm | 6 | Not usable |
| Pappardelle | 150 mm | 50 mm | 6 | Not usable |
| Ravioli | 150 mm | 45 mm | 6 | Not usable |
| Lasagna | 150 mm | 150 mm | 6 to 9 | Usable |
| Fettuccine | 150 mm | 6.5 mm | 6 | Usable |
| Tagliolini | 150 mm | 1.5 mm | 8 to 9 | Usable |
MARCATO Made in Italy Spaghetti 150 Attachment
- 16 oz
- Prime
Pros & ConsViewHide
Reasons to buy
- Made in Italy cutter built for the Atlas 150
- 84% of Amazon ratings are 5-star
- Spaghetti is a staple shape for first-time cutters
Reasons to avoid
- Fits the Atlas 150 only, so check your machine name
- Single shape per attachment
Marcato Bigoli Attachment for Atlas 150 Pasta
- 0.54 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Thick bigoli-style strands from an Atlas 150 attachment
- Chrome steel build, made in Italy
- 73% of ratings are 5-star
Reasons to avoid
- Fits the Atlas 150 line, not every Marcato machine
- About 9% of ratings are 1-star
Marcato Ravioli 150 Attachment for Atlas 150 Pasta
- 1.42 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Adds filled ravioli to an Atlas 150 setup
- Aluminum rollers per the listing
- 73% of ratings are 5-star
Reasons to avoid
- Booklet marks ravioli as hand-crank only, not for the motor
- Higher price than the cutter attachments
Marcato Capellini 150 Pasta Cutter Attachment
- 0.54 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Thin angel-hair style cut for the Atlas 150
- Chrome steel build, made in Italy
- 4.2-star Amazon rating
Reasons to avoid
- Needs thin sheets, so set the regulator high
- Single shape per attachment
Use the table as a checklist for any Marcato Atlas 150 attachments you plan to buy. Pick the shape, note its regulator number, and check the motor column if you plan to run the machine with the Pastadrive motor. The booklet marks only the four shapes as unsuited to the motor, so the others carry no motor restriction in the booklet.
Which Shapes Need the Hand Crank
Mafaldine, reginette, pappardelle and ravioli are the four Marcato Atlas 150 attachments the booklet marks as not usable with the Pastadrive motor, so they need the hand crank instead. If you are choosing a wide ribbon, see tagliatelle vs pappardelle for how the two differ.
The booklet’s safety section adds that attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury. For that reason, buy cutters that the Marcato table lists for the Atlas 150, and avoid unbranded shapes that do not state their fit.
Sheet Thickness and Regulator Settings
The regulator sets sheet thickness from about 4.8 mm at position 0 down to about 0.5 mm at position 9, according to the booklet’s thickness table.

The booklet’s method is to pass the dough through position 0 several times, folding the sheet in half and flouring it at each pass. Then pass it once per number until you reach the thickness you need, cut it into pieces about 25 cm long, and flour both sides lightly before the cutting rollers.
- Position 0: about 4.8 mm
- Position 2: about 3.1 mm
- Position 4: about 1.8 mm
- Position 6: about 1.0 mm
- Position 9: about 0.5 mm
Among the Marcato Atlas 150 attachments, thin sheets suit capellini and tagliolini, which the table sets at positions 8 to 9. Bigoli, the thick Venetian bigoli pasta, is set at position 2 because it is a thicker strand, so match the regulator to the shape rather than to a single fixed number. For a beginner walk-through of rolling and cutting, see how to use a pasta machine.
Pastadrive Motor Limits for Attachments
The Pastadrive motor is one of the Marcato Atlas 150 attachments, and it ships only with Atlasmotor and Ampiamotor models, and the booklet limits it to 15 minutes of continuous use.
Unplug the cord before you fit or remove the motor from the machine, and never remove the plug with wet hands. Use only the cable supplied with the motor, or an extension rated for the current shown on the motor plate.
The motor carries a 2-year warranty from the date of purchase, while the machine itself has 10 years of assistance against manufacturing defects. Plan rest breaks for long batches with Marcato Atlas 150 attachments, and remember that the four hand-crank shapes cannot be run on the motor at all.
Checking Model Names Before You Buy
The booklet’s cover lists ten model names, and its cutter table is headed Atlas 150 only, so check your machine’s name before buying.
Matching these names to your own machine is the first step with any Marcato Atlas 150 attachments. The names include the Atlas 150 and Atlas 180, the Atlas Roller and Atlas Slide variants, the Atlasmotor and Ampiamotor, and the Ampia 150 and 180. The table’s 150 mm width matches the Atlas 150, but the booklet does not confirm whether these shapes fit the 180 range. For fit questions, use Marcato’s official website or write to [email protected].
Cleaning and Caring for Attachments
Marcato says not to wash the machine or its Marcato Atlas 150 attachments in water or the dishwasher, so wipe them with a cloth and a brush. Our step-by-step guide on how to clean the Marcato Atlas 150 expands on the routine.
The cutting combs under the rollers come off, which makes Marcato Atlas 150 attachments easier to clean thoroughly.
- Press the rod downwards, then push it sideways to remove it.
- Insert the rod into the comb’s central hole and lift the comb out of its seat.
- Clean the rollers and the comb with a brush or cloth, then reverse the steps to refit everything.
If the rollers squeak, the booklet suggests a few drops of food-contact Vaseline oil at the roller ends.
What the Booklet Does Not Say
The booklet gives warranty and contact details, but it gives no prices for Marcato Atlas 150 attachments, no stock levels, retailer listings or Atlas 180 cutter widths.
The warranty covers manufacturing defects for 10 years, and the motorized Atlasmotor and Ampiamotor for 2 years from purchase. Damage from improper use is excluded, and the booklet does not describe normal wear, so keep your receipt and the model name ready if you contact Marcato.
Check current prices and availability with the seller, not with the booklet, since the printed document cannot track them. Once you have cut a batch, our guide on how to store fresh pasta covers fridge, freezer and drying methods.
Frequently Asked Questions
Does the Marcato Atlas 150 come with cutter attachments?
The booklet’s box list names the machine body, crank, clamp and manual, plus the Atlas Slide or the Pastadrive motor on specific models. It names no cutter shapes, so check which Marcato Atlas 150 attachments your package contains against that list before you assume a shape is included.
Can every Marcato Atlas 150 attachment run on the Pastadrive motor?
No. The booklet marks mafaldine, reginette, pappardelle and ravioli as not usable with the Pastadrive motor. The other shapes carry no such mark in the booklet, and it does not provide a longer compatibility list.
What regulator setting does spaghetti need?
The booklet recommends position 4 for spaghetti with a 2 mm diameter. Fettuccine is set to position 6, and the thinner capellini uses positions 8 to 9. Each of these Marcato Atlas 150 attachments has its own setting. Treat these as starting points and adjust by how the dough feeds through.
Can I put Marcato Atlas 150 attachments in the dishwasher?
No. The booklet says not to wash the machine and its accessories in water or the dishwasher, including any Marcato Atlas 150 attachments you own. Clean them with a cloth and a brush, and remove the cutting combs when you need a deeper clean.
Does the warranty cover wear on attachments?
The booklet promises assistance for 10 years against manufacturing defects. It excludes damage from improper use and does not describe normal wear, so contact Marcato at [email protected] with your model name and purchase details.
Before you order any Marcato Atlas 150 attachments, note your model name and whether you have the Pastadrive motor. Match the shape against the table, check the four motor-excluded shapes, and confirm fit with Marcato if you own an Atlas 180 or a motorized model.
7 min readBy Use & ModelMarcato Atlas 180 Attachments: What Comes With It and What FitsUpdated Nov 8, 2026
7 min readBy Use & ModelMarcato Atlas 150 Replacement Parts: Box Contents, Cleaning and WarrantyUpdated Nov 8, 2026
8 min readBy Use & ModelMarcato Atlas 150 Lasagna: How to Roll Sheets at HomeUpdated Nov 7, 2026
8 min readBy Use & ModelHow to Clean Marcato Atlas 150: Brush, Dry, and Store It RightUpdated Nov 6, 2026
8 min readBy Use & ModelMarcato Atlas 150 Manual: Setup, Thickness Settings and CareUpdated Nov 7, 2026
8 min readBy Use & ModelImperia Pasta Machine Attachments: Cutter Sizes and Fit GuideUpdated Nov 15, 2026