KitchenAid Bowl Lift Attachments: Which Pasta Tools Fit Your Mixer
7 min read · by Arjun Mehta · Last updated: November 7, 2026
KitchenAid bowl lift attachments for pasta are designed for most stand mixers, but the manufacturer names one bowl-lift model as an exception. The pasta roller, cutter set and pasta press are the main pasta tools, and each listing states its fit in different words.
Bowl-lift hubs open differently from tilt-head hubs, and exclusion lists use exact model numbers. Check your model before you buy, then follow the attachment steps below.
How Bowl-Lift Hubs Connect Attachments
On a bowl-lift mixer, you flip up the hub cover to reach the attachment hub, while tilt-head models use a cover you unscrew.

The attachment hub sits on the front of the mixer. Attachments turn through a square socket, and a pin on the attachment must drop into a notch on the hub rim. KitchenAid UK pasta roller guide describes this for its pasta roller and cutter set, and it gives the bowl-lift hub instruction separately from the tilt-head one. If your mixer is a tilt-head, see our guide to KitchenAid Classic Plus attachments.
Use these steps for any of the kitchenaid bowl lift attachments that use the hub:
- Turn the mixer to speed 0 and unplug it.
- Flip up the hub cover on the bowl-lift mixer.
- Slide the attachment shaft into the square socket. Rotate it slightly if the pin does not drop into the notch.
- Tighten the attachment knob until the attachment is secure, then close the hub cover.
Which KitchenAid Bowl Lift Attachments Fit Pasta Making
KitchenAid lists the pasta roller and the cutter set as designed for all stand mixers. It lists the pasta press as designed for all stand mixers except the Professional bowl-lift stand mixer 5KSM7990X. If your mixer is the smaller 3.3 L model, our Artisan Mini pasta attachment fit guide shows which tools work.
The table below uses the wording from KitchenAid’s UK compatibility page. Read the exact wording on the listing you plan to buy, because it can change, and check that your model is not an exception for the kitchenaid bowl lift attachments you want.
| Attachment | Model number | Listed fit |
|---|---|---|
| Pasta roller | 5KSMPSA | All KitchenAid stand mixers |
| Pasta cutter and roller set | 5KSMPRA | All KitchenAid stand mixers |
| Pasta press, 6 shapes | 5KSMPEXTA | All stand mixers except the Professional bowl-lift 5KSM7990X |
KitchenAid KSMPRA 3-pc Pasta Roller/Cutter Set
- 7.5 pounds
Pros & ConsViewHide
Reasons to buy
- Roller and cutter attachments for KitchenAid stand mixers
- Rolls even sheets without hand cranking
- 88% of 9K Amazon ratings are 5-star
Reasons to avoid
- Needs a compatible KitchenAid stand mixer
- Rolls and cuts the dough, but does not fill or fold tortellini
- One of the costlier tools in this guide
KitchenAid KSMPEXTA Gourmet Pasta Press Attachment
- 2.7 pounds
- Prime
Pros & ConsViewHide
Reasons to buy
- Six quick-change discs: spaghetti, bucatini, rigatoni, fusilli, large and small macaroni
- Built-in wire cutter and a storage case
- Stainless steel cleaning tool included
Reasons to avoid
- Needs a KitchenAid stand mixer, sold separately
- Takes more cleanup than a roller
- Premium-priced attachment
Antree 3-1 Pasta Roller & Cutter Attachment Set
- Home
- 3.5 pounds
- Prime
Pros & ConsViewHide
Reasons to buy
- Roller plus spaghetti and fettuccine cutters in one set
- Lower price than the KitchenAid-branded set
- 4.5-star Amazon rating
Reasons to avoid
- Third-party brand, not made by KitchenAid
- Confirm the fit for your mixer before buying
The KitchenAid UK compatibility FAQ is the source for these statements. The same wording says that not every attachment fits every model, so a general “all stand mixers” line is not a guarantee for every bowl-lift version.
Pasta Roller Settings and Cutter Widths
The pasta roller rolls sheets 14 cm wide through eight thickness settings, and the cutter set cuts fettuccine 6.5 mm wide or spaghetti 2 mm wide.
For the kitchenaid bowl lift attachments covered here, KitchenAid’s product tips match each setting to a pasta type. Start on the lower numbers to knead, then move to higher numbers as the dough gets thinner. Our step-by-step guide on how to use the KitchenAid pasta roller shows the full routine, and how to use the KitchenAid ravioli maker covers filled pasta.
- Settings 1 to 2: kneading and starting to thin the dough.
- Setting 3: thick kluski noodles, which use double the egg.
- Settings 4 to 5: lasagne sheets, fettuccine, spaghetti and ravioli.
- Settings 6 to 7: tortellini, thin fettuccine and linguine fini.
- Settings 7 to 8: angel hair type pasta and very thin linguine.
The page lists only two cutter widths for this set. Choose the cutter by the strand you want, then match the sheet thickness to the same recipe.
The Pasta Press Plates and Parts
The pasta press comes with six plates for spaghetti, bucatini, rigatoni, fusilli, large macaroni and small macaroni, according to its manual.
The press includes a housing, cutter, auger, pasta ring, storage case, combo tool and cleaning brush. The manual says not to feed dough by hand and to push it with the combo tool instead. A press is one of the kitchenaid bowl lift attachments that needs this extra care, so keep the combo tool close to the press during use. For assembly, speeds and cleaning, see our KitchenAid pasta extruder manual guide.
The trade-off with kitchenaid bowl lift attachments like the press is simple: more parts give more shapes, but also more pieces to clean after each batch. Keep the plates in the storage case so none get lost between sessions.
KitchenAid Bowl Lift Attachments: Checking Fit by Model
KitchenAid bowl lift attachments are excluded by exact model number, so the number on your mixer decides fit.

KitchenAid’s UK mixer attachments page says there are a few exceptions to universal compatibility. Its ice cream maker fits bowl-lift mixers except the 5KPM5 Heavy Duty, 5KPM50 and 5K5. The same page says household attachments are not compatible with the Professional bowl-lift 6.9 L 5KSM7990.
Use this checklist before you order any of the kitchenaid bowl lift attachments:
- Find the model number on your mixer or in its manual.
- Compare it with the exclusion wording on the product listing.
- Confirm whether your mixer is bowl-lift or tilt-head.
- Contact KitchenAid customer service when the listing is unclear, as the UK page advises.
Cleaning Pasta Attachments After Use
Let the pasta roller air dry for about one hour, then remove dried dough with the included cleaning brush.
Do not immerse the roller or cutters in water, and do not put them in the dishwasher. Never scrape dough off with a knife or another sharp object, and do not run a dish towel through the rollers. Those limits come from the roller and cutter page, so check the manual before you wash other kitchenaid bowl lift attachments.
Once the dough is gone, polish the rollers and cutters with a soft, dry cloth and store them in a dry place at room temperature. Once the pasta is cut, our guide on how to store fresh pasta covers fridge, freezer and drying methods.
What the Sources Do Not Confirm
This guide could not confirm bowl-lift exclusions for the US market, so treat the UK wording as a starting point, not a final answer.
The US pasta category page on kitchenaid.com did not load during this check, so US listings were not read. The sources read here did not name a pasta exclusion for the Artisan, Pro 5 Plus or Pro 600 models.
Prices and stock were not checked. Claims on third-party pasta attachments sold on marketplaces were not verified, so read the manual for your model before you buy any kitchenaid bowl lift attachments from another brand.
Frequently Asked Questions
Do all KitchenAid bowl lift attachments fit every mixer?
No. KitchenAid’s UK page says not all attachments fit every mixer model. The pasta press is excluded for the Professional bowl-lift 5KSM7990X, while the pasta roller and cutter set are listed for all stand mixers.
How do I attach a pasta roller to a bowl-lift mixer?
Turn the mixer to speed 0 and unplug it. Flip up the hub cover, slide the shaft into the square socket, and tighten the knob until the roller is secure. Close the hub cover when you finish. The same steps apply to most kitchenaid bowl lift attachments that use the hub.
Is the pasta press excluded from any bowl-lift model?
Yes. KitchenAid’s UK compatibility page excludes the pasta press from the Professional bowl-lift stand mixer 5KSM7990X. The other pasta items on that page are listed for all stand mixers.
Can I put pasta attachments in the dishwasher?
No. KitchenAid says not to immerse the pasta roller or cutters in water or wash them in the dishwasher. Air dry the roller for about an hour, then brush off the dough.
Which bowl-lift models are excluded from the ice cream maker?
The UK page excludes the 5KPM5 Heavy Duty, 5KPM50 and 5K5 bowl-lift models from the ice cream maker. It also says the Professional bowl-lift 5KSM7990 is not compatible with household attachments.
What should I do if my model is not listed?
Check your mixer’s manual and the product listing first. If the page is still unclear, contact KitchenAid customer service before you order any kitchenaid bowl lift attachments, as the UK page advises for uncertain cases.
Before you buy, match your mixer’s model number against the exclusion wording for each of the kitchenaid bowl lift attachments you consider. Read the hub steps before the first use, and keep the pasta press parts together in the storage case so nothing is lost between batches.
8 min readBy Use & ModelKitchenAid Artisan Attachments: Which Pasta Tools Fit Your MixerUpdated Nov 8, 2026
8 min readBy Use & ModelKitchenAid Artisan Mini Attachments: Which Pasta Tools FitUpdated Nov 7, 2026
8 min readBy Use & ModelKitchenAid Heavy Duty Attachments: Which Ones Fit Your MixerUpdated Nov 15, 2026
7 min readBy Use & ModelKitchenAid Pro 5 Plus Attachments: Pasta Press Fit, Setup and SpeedsUpdated Nov 8, 2026
6 min readBy Use & ModelKitchenAid Classic Plus Attachments: Which Ones Fit and What Each DoesUpdated Nov 7, 2026
8 min readBy Use & ModelKitchenAid Pro 600 Attachments: What Fits and What to CheckUpdated Nov 8, 2026