Marcato Atlas 180 Attachments: What Comes With It and What Fits
7 min read · by Arjun Mehta · Last updated: November 8, 2026
The Marcato Atlas 180 attachments depend on which version you buy, and Marcato’s own booklet prints its cutter table for the 150 model only. The box holds the machine, crank, clamp and manual, while the Pastadrive motor comes only with the motor versions.
Treat any cutter fit for the 180 as a question to confirm before you buy. Some retailer listings disagree on whether 150 mm cutters fit the 180 mm body.
What Comes in the Box
For marcato atlas 180 attachments, the box holds the machine body, a hand crank, a clamp and the instruction manual, according to the Marcato Atlas and Ampia booklet‘s list of contents.
The slide is included only with the Atlas Slide model. The Pastadrive motor and its power cord are included only with the Atlasmotor and Ampiamotor versions, so a machine bought without a motor arrives without one.
The booklet cover lists the Atlas 150, Atlas 180, Atlas Roller 150 and 180, Atlas Slide 150 and 180, Atlasmotor, Ampia 150 and 180, and Ampiamotor as one family. Check the model name printed on your machine before you assume the marcato atlas 180 attachments include a slide or motor.
Marcato Atlas 180 Attachments: Which Cutters Fit
For marcato atlas 180 attachments, the booklet gives no cutter list, so whether a 150 mm cutter fits the 180 body is not confirmed by the manual.
The booklet’s cutter table is headed “Atlas 150 accessories” and lists 15 shapes, while the text beside it says the 150 takes 12 extra cutting accessories. The booklet does not fully agree with itself on the count, so the table is a guide to the 150 line only.
Retailer listings disagree. Some say 150 mm cutters do not fit the 180 mm machine, and another listing describes a 180 mm cutting attachment for the 150. Neither claim is confirmed by Marcato’s booklet for marcato atlas 180 attachments, so treat the 180 fit as unknown until the seller or Marcato confirms it in writing.
Cutter Shapes Listed in the Booklet
The booklet lists 15 cutter shapes for the Atlas 150, with cut widths from 1 mm for vermicelli and capellini up to 150 mm for lasagna. The table below shows each shape, its width and the regulator setting the booklet recommends.

| Shape | Cut width | Recommended setting | Pastadrive motor |
|---|---|---|---|
| Vermicelli | 1 mm | 5 | Usable |
| Spaghetti | 2 mm | 4 | Usable |
| Bigoli | 3.5 mm | 2 | Usable |
| Linguine | 3 mm | 4 | Usable |
| Capellini | 1 mm | 8-9 | Usable |
| Spaghetti chitarra | 2 mm | 4 | Usable |
| Trenette | 3.5 mm | 6-7 | Usable |
| Lasagnette | 10 mm | 6-9 | Usable |
| Mafaldine | 8 mm | 6 | Not usable |
| Reginette | 12 mm | 6 | Not usable |
| Pappardelle | 50 mm | 6 | Not usable |
| Ravioli | 45 mm | 6 | Not usable |
| Lasagna | 150 mm | 6-9 | Usable |
| Fettuccine | 6.5 mm | 6 | Usable |
| Tagliolini | 1.5 mm | 8-9 | Usable |
The four shapes marked not usable carry an asterisk in the booklet, which means they cannot be run with the Pastadrive motor. Those four are the only exclusions the table names.
These widths and settings are the booklet’s figures for the 150 model. Use them to understand each shape, not as a fit test for the marcato atlas 180 attachments. For the 150 model itself, see our Marcato Atlas 150 manual guide.
Sheet Thickness and Regulator Settings
The regulator runs from position 0, at about 4.8 mm, down to position 9, at about 0.5 mm, according to the booklet’s thickness table.

Start the dough at position 0, fold and flour the sheet until it is smooth and compact, then pass it once at each number until you reach the thickness you want. If you are new to rolling, our how to use a pasta machine guide covers the basics. Four settings from the table are useful starting points:
- Position 2, about 3.1 mm, the setting for bigoli.
- Position 4, about 1.8 mm, the setting for spaghetti.
- Position 6, about 1.0 mm, the setting for fettuccine.
- Position 9, about 0.5 mm, the thinnest sheet in the table.
The thickness values are approximate, as the booklet’s tilde signs show. Cut a short test piece before you run a full batch.
Pastadrive Motor Limits
The Pastadrive motor used with marcato atlas 180 attachments is rated for no more than 15 minutes of uninterrupted use, and the booklet says to use only the cable supplied with it.
Extensions must suit the current shown on the motor rating plate. Check that plate before you add any extension cord, and never unplug the motor with wet hands.
Mafaldine, reginette, pappardelle and ravioli cannot run with the Pastadrive, so cut those shapes with the hand crank, and see our Marcato Atlas 180 ravioli guide for the ravioli case. The motor limits apply only to the Atlasmotor and Ampiamotor versions, which are the only ones with the motor in the box.
Cleaning and Care for Attachments
Clean the machine and marcato atlas 180 attachments with a cloth and a brush, never with water or in a dishwasher, according to the booklet’s care section. For a longer walkthrough, see our guide on how to clean a Marcato Atlas 150.
The combs under the cutting rollers come out for a deeper clean. The booklet describes this sequence:
- Press the rod downward and push it sideways to remove it.
- Insert the rod into the central hole of the comb and pull the comb out of its seat.
- Clean the rollers and the comb with a brush or cloth, then reverse the steps to reassemble.
If the rollers squeak, the booklet suggests a few drops of food-contact Vaseline oil at the ends of the rollers.
Warranty and Safety Limits
The booklet promises 10 years of assistance for manufacturing defects on Marcato products, and 2 years from purchase for the motorized Atlasmotor and Ampiamotor.
The warranty on marcato atlas 180 attachments does not cover damage from improper use or use other than the one shown in the manual. Keep the receipt with the motor, since its period is shorter than the machine’s.
The booklet warns that attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury. For that reason, confirm that any cutter among your marcato atlas 180 attachments is a Marcato part for your machine before you use it.
Checking Fit Before You Buy
Confirm the model name, motor version and cutter shape before you buy marcato atlas 180 attachments, because the booklet gives no cutter list for the 180.
Four questions settle most of the decision:
- Is the machine marked Atlas 180, not Atlas 150 (see our Marcato Atlas 150 guide)?
- Is the motor an Atlasmotor or Ampiamotor with the Pastadrive, or a machine with no motor?
- Does the shape you want appear on the four-shape exclusion list?
- Has the seller or Marcato confirmed the cutter fits the 180 in writing?
The booklet gives Marcato’s website and an info address for further questions, so contact the company directly if a fit for marcato atlas 180 attachments is unclear. Recipes and product information are also listed there.
Frequently Asked Questions
What comes in the Marcato Atlas 180 box?
The box holds the machine body, crank, clamp and instruction manual, according to the booklet. A slide is included only with the Atlas Slide model, and the Pastadrive motor with its power cord comes only with the Atlasmotor and Ampiamotor versions.
Do Atlas 150 cutters fit the Atlas 180?
The booklet does not confirm this for marcato atlas 180 attachments. Its cutter table is headed Atlas 150, and retailer listings disagree on the point. Ask Marcato or the seller for a written fit statement before you buy any cutter for the 180.
Can the Pastadrive motor run every cutter shape?
No. The booklet marks mafaldine, reginette, pappardelle and ravioli as not usable with the Pastadrive motor. Cut those four shapes with the hand crank, and keep the motor for the other shapes in the table.
Can I wash the attachments in the dishwasher?
No. The booklet says not to wash the machine or accessories in water or a dishwasher. Clean them with a cloth and a brush, and remove the combs under the cutting rollers for a deeper clean.
How long is the warranty on a motorized Atlas?
The booklet gives 2 years from purchase for the Atlasmotor and Ampiamotor, and 10 years of assistance for manufacturing defects on the machine. Damage from improper use is not covered.
If a cutter for the 180 matters to your plans, confirm the fit before you pay, and do not rely on a listing alone. For marcato atlas 180 attachments, check the model name and motor version first, because those decide what comes in the box and whether the Pastadrive can run the shapes you want.
7 min readBy Use & ModelMarcato Atlas 180 Ravioli: Can You Make It at Home?Updated Nov 6, 2026
8 min readBy Use & ModelMarcato Atlas 150 Attachments: Which Cutter Shapes FitUpdated Nov 8, 2026
7 min readBy Use & ModelMarcato Atlas 150 Replacement Parts: Box Contents, Cleaning and WarrantyUpdated Nov 8, 2026
8 min readBy Use & ModelMarcato Atlas 150 Lasagna: How to Roll Sheets at HomeUpdated Nov 7, 2026
8 min readBy Use & ModelHow to Clean Marcato Atlas 150: Brush, Dry, and Store It RightUpdated Nov 6, 2026
8 min readBy Use & ModelMarcato Atlas 150 Manual: Setup, Thickness Settings and CareUpdated Nov 7, 2026