Solo Stove Pi Prime Dimensions: Size, Weight and Panoramic Opening
8 min read · by Arjun Mehta · Last updated: November 8, 2026
The Solo Stove Pi Prime dimensions are 20.5 inches across and 15.5 inches tall, which suits most patio tables and counters. That footprint comes from the published review figures for the propane-fired Pi Prime, and it is the size to plan around before you buy.
Solo Stove’s own product page could not be checked for this guide, so the Solo Stove Pi Prime dimensions below come from independent reviews. Confirm them against the unit you plan to buy.
Solo Stove Pi Prime Dimensions at a Glance
The Solo Stove Pi Prime dimensions give a 20.5-inch diameter and a 15.5-inch height, and the Pi Prime weighs 30 pounds, according to ActiveGearReview’s Prime review. The same review lists a panoramic opening of 13 by 3.5 inches, which is the window you use to watch the flame and the pizza.
| Dimension | Pi Prime (per review) |
|---|---|
| Diameter | 20.5 in (52.1 cm) |
| Height | 15.5 in (39.4 cm) |
| Weight | 30 lb (13.6 kg) |
| Panoramic opening | 13 in x 3.5 in (33 cm x 8.9 cm) |
| Cooking surface | Not confirmed from a source read for this guide |
In metric units, the same review figures are 52.1 cm across, 39.4 cm tall and 13.6 kg, with a panoramic opening of 33 cm by 8.9 cm. Use whichever unit matches your tape measure, but do not mix the two when you compare against a shelf or table. Most listings repeat the 20.5-inch diameter and 15.5-inch height, so these Solo Stove Pi Prime dimensions look consistent across retailers. One listing in search results shows about 36.6 pounds, which does not match the review, so check the weight on the product sheet before you plan a stand or a move.
How the Pi Prime Compares With the Original Pi
The Pi Prime and the original Solo Stove Pi (see our Solo Stove Pi dimensions guide) share the same 20.5-inch diameter, and the Prime is listed about 0.4 inch taller and 0.5 pound lighter. According to Reviewed’s original Pi review, the Pi is 15.125 inches tall and weighs 30.5 pounds, with a 12-by-12-inch cooking surface.

| Criterion | Pi Prime | Original Pi |
|---|---|---|
| Diameter | 20.5 in | 20.5 in |
| Height | 15.5 in | 15.125 in |
| Weight | 30 lb | 30.5 lb |
| Cooking surface | Not confirmed | 12 in x 12 in |
Compared side by side, the Solo Stove Pi Prime dimensions differ from the original mainly in height. Because the two figures come from different reviews, treat a gap of half an inch or less as within normal measurement variation. If you need an exact number for a specific fit, check the manufacturer’s sheet for your unit.
Reviewed’s body text gives 21 inches across and 15 inches tall, while its spec box gives 20.5 and 15.125. This guide uses the spec box, since it matches the other sources for the diameter.
Space Needed Around the Oven
The Solo Stove gas burner manual for the Pi family asks for at least 36 inches of clear space to the sides and back, and a propane cylinder at least 12 inches from the oven. Those distances matter more than the oven footprint once you add a table or stand. In metric terms, 36 inches is about 92 cm, 12 inches is about 31 cm, and the 3-inch hose gap is about 8 cm.

The Solo Stove gas burner instruction manual is written for the Pi family, not a separate Prime booklet. Use it as a planning guide and check the sheet packed with your Prime before you install anything. Our Solo Stove Pi Prime manual guide covers the setup and controls.
- Keep at least 36 inches of clear space to the sides and back.
- Keep the propane cylinder at least 12 inches from the oven.
- Keep the fuel hose at least 3 inches from any hot surface.
- Do not place the oven under overhead structures.
For the stand or table, the original Pi stand measures 38.1 inches high, 47.3 inches long and 35 inches wide, and weighs 45 pounds, according to Reviewed. The Prime’s stand dimensions were not confirmed for this guide, so measure the table you plan to use rather than assuming a match.
What the Original Pi Stand Adds to the Footprint
The original Pi was sold with a stand, and the review figures show how much room that stand takes up. Reviewed lists the stand at 38.1 inches tall, 47.3 inches long and 35 inches wide, weighing 45 pounds, with the oven itself at about 30.5 pounds. Those numbers are for the original Pi, not the Solo Stove Pi Prime dimensions listed above, so do not assume the Prime’s stand is the same size.
The practical point is that a stand adds more floor space than the Solo Stove Pi Prime dimensions suggest on their own. Before you buy, check whether the Prime is sold with a stand or only as the bare oven, and measure the stand you will use. The original Pi’s own dimensions are covered in the review figures above.
- Original Pi height: about 15.1 inches, from the review table.
- Original Pi stand: 38.1 by 47.3 by 35 inches, 45 pounds.
- Prime stand: not confirmed in the sources read, so check the product page.
How to Measure Your Spot Before You Buy
Use the Solo Stove Pi Prime dimensions as your starting point. Mark a flat spot at least 20.5 inches across, then check 15.5 inches of headroom and the clearances above before the oven arrives. A tape measure is enough for this check. Once the spot is ready, our Solo Stove Pi Prime recipes and the Solo Stove Pi instructions show how to cook.
- Measure the surface width and depth, then add the 36-inch clearance to the sides and back.
- Measure the height from the surface to any roof, pergola or shelf above it.
- Measure the route from the spot to where the propane cylinder will stand, and keep it at least 12 inches from the oven.
- Confirm there is no overhead structure above the spot.
- Compare the totals with the dimensions table above.
Matching Your Pizza Size to the Opening
The Prime’s panoramic opening measures 13 by 3.5 inches, or 33 by 8.9 cm. That is the real limit for getting food and tools in and out. A pizza peel, board or launcher must pass through the 13-inch width, and the 3.5-inch height limits how thick a handle or a turning tool can be when you slide it in.
Measure your peel’s blade and handle before you buy the oven, not after. A long, wide peel that fits a patio table can still be too wide to slide through the opening, so test with the peel you already own. This check matters more than the overall height in the Solo Stove Pi Prime dimensions, because the opening decides what you can actually cook with.
What the Dimensions Do Not Tell You
The Solo Stove Pi Prime dimensions describe the body and the opening, but they do not describe the cooking surface, the stone or the weight with accessories. Those details need a second check before you buy.
- Cooking surface: not confirmed for the Prime in this guide, so check the stone size in the box.
- Weight: the review gives 30 pounds, and one listing differs, so confirm it on the product sheet.
- Manual: the Prime-specific gas manual could not be opened, so the clearances above come from the Pi family manual.
If any figure here conflicts with the booklet in the box, follow the booklet and contact Solo Stove about the unit you bought.
Frequently Asked Questions
How big is the Solo Stove Pi Prime?
The Solo Stove Pi Prime dimensions are 20.5 inches in diameter and 15.5 inches tall, according to ActiveGearReview. Its panoramic opening measures 13 by 3.5 inches. Check these figures against your unit before you choose a spot.
Are the Solo Stove Pi Prime dimensions bigger than the original Pi?
Not by much. The Solo Stove Pi Prime dimensions match the original on width, with both listed at 20.5 inches across. The Prime is listed at 15.5 inches tall, against 15.125 inches for the original, according to the two reviews. The gap is small, so the diameter matters more for planning.
How much does the Pi Prime weigh?
ActiveGearReview lists 30 pounds, or 13.6 kilograms. One listing in search results shows a much higher figure, so confirm the weight with the product sheet before you plan a lift or a stand.
How much space does the Pi Prime need?
The Solo Stove gas burner manual for the Pi family asks for 36 inches of clear space to the sides and back, and a propane cylinder at least 12 inches away. Plan those distances around the 20.5-inch footprint before you place the oven.
Where can I check the exact size of my unit?
The booklet in the box and the manufacturer’s product page give the most reliable figures. Compare the Solo Stove Pi Prime dimensions here with the review numbers. If they differ, follow the manufacturer’s figures for your unit.
Does the Pi Prime opening fit a pizza peel?
The opening is 13 by 3.5 inches, so the blade and handle of your peel must pass through that width and height. Test the peel you already own against the Solo Stove Pi Prime dimensions before you buy the oven.
Use the Solo Stove Pi Prime dimensions, a 20.5-inch diameter and 15.5-inch height, to test whether a spot works, then leave room for the propane cylinder and the clearances in the manual. Before you buy, check the numbers against the booklet packed with your oven.
8 min readBy Use & ModelSolo Stove Pi Dimensions: Size, Weight and Cooking SurfaceUpdated Nov 8, 2026
8 min readBy Use & ModelSolo Stove Pi Prime Manual: Setup, Safety and Care GuideUpdated Nov 8, 2026
8 min readBy Use & ModelSolo Stove Pi Prime Recipes: Easy Guide for 2026Updated Nov 8, 2026
6 min readBy Use & ModelSolo Stove Pi Prime Accessories: What Each One Is ForUpdated Nov 15, 2026
8 min readBy Use & ModelSolo Stove Pi Temperature: How Hot It Gets and How to Read ItUpdated Nov 8, 2026
8 min readBy Use & ModelSolo Stove Pi Recipes: Official Doughs and Topping IdeasUpdated Nov 8, 2026