KitchenAid 7 Quart Attachments: What Fits and What to Check
9 min read · by Arjun Mehta · Last updated: November 15, 2026
The KitchenAid 7 quart attachments are official add-ons, each sold under its own model code with a note on which mixers it fits. Check that code and the fit wording before you buy, because a 7 quart bowl size does not by itself confirm compatibility.
KitchenAid 7 quart attachments connect through the hub on the front of the mixer, but KitchenAid’s fit notes exclude some bowl-lift models, so your exact model code matters more than the bowl size. Our KitchenAid bowl-lift attachments guide covers that model family in more detail.
KitchenAId KSMPSA Pasta Roller Attachment
- 2.4 pounds
KitchenAid KSMPRA 3-pc Pasta Roller/Cutter Set
- 7.5 pounds
Pros & ConsViewHide
Reasons to buy
- Roller and cutter attachments for KitchenAid stand mixers
- Rolls even sheets without hand cranking
- 88% of 9K Amazon ratings are 5-star
Reasons to avoid
- Needs a compatible KitchenAid stand mixer
- Rolls and cuts the dough, but does not fill or fold tortellini
- One of the costlier tools in this guide
KitchenAid KSMPEXTA Gourmet Pasta Press Attachment
- 2.7 pounds
- Prime
Pros & ConsViewHide
Reasons to buy
- Six quick-change discs: spaghetti, bucatini, rigatoni, fusilli, large and small macaroni
- Built-in wire cutter and a storage case
- Stainless steel cleaning tool included
Reasons to avoid
- Needs a KitchenAid stand mixer, sold separately
- Takes more cleanup than a roller
- Premium-priced attachment
How the attachment hub works
Every KitchenAid stand mixer has an attachment hub on its front, and that hub is where each attachment connects. According to Wikipedia’s KitchenAid entry, attachments from the 1930s can be used on modern mixers, and the reverse also holds.
The same entry warns that other accessories are not necessarily compatible, even across similar models made at the same time. The hub shape is shared, but the accessory list is model by model, which is why the model code is the key check.

Which KitchenAid 7 quart attachments are listed for all mixers
KitchenAid’s UK attachment page labels the pasta roller (5KSMPSA) and the meat grinder (5KSMFGA) as fitting all mixers, while several pasta attachments say only stand mixers.

The page gives a model code and fit wording for each of the KitchenAid 7 quart attachments listed. Read the wording as written, because “for all mixers” and “for stand mixers” are different phrases, and the page does not explain the difference. KitchenAid’s UK attachment list gives the full set of codes.
| Attachment | Model code | Fit wording on the page |
|---|---|---|
| Pasta Roller | 5KSMPSA | for all mixers |
| Pasta Press, 6 shapes | 5KSMPEXTA | for stand mixers |
| 3-in-1 Metal Pasta Attachment | 5KSM3MPA | for stand mixers |
| 3-in-1 Plastic Pasta Attachment | 5KSM3PPA | for stand mixers |
| Meat Grinder | 5KSMFGA | for all mixers |
| Food Processor for Mixer | 5KSM2FPA | for all mixers |
| Spiralizer to Peel, Core and Slice | 5KSM1APC | for all mixers |
| Vegetable Sheet Cutter | 5KSMSCA | for all mixers |
| Ice Cream Maker | 5KSMICM | Footnote applies, see below |
Two of the KitchenAid 7 quart attachments rely on a footnote instead of plain fit wording, so read the footnote before ordering the ice cream maker. The page also lists a vegetable slicer and shredder (5KSMVSA) with the same “for all mixers” wording, which makes it one more of the KitchenAid 7 quart attachments to check by code.
Pasta attachments and cut widths
The pasta roller has eight thickness settings, and the cutter strands come in fixed widths, from 6.5 mm for fettuccine to 2 mm for spaghetti.

According to KitchenAid’s pasta roller guide, settings 1 or 2 are for kneading and first thinning, settings 4 or 5 suit lasagne, fettuccine, spaghetti and ravioli, and settings 7 or 8 give very thin pasta such as angel hair. Lasagne sheets are 14 cm wide.
The guide recommends speed 2 for the roller, speed 5 for the fettuccine cutter and speed 7 for the spaghetti cutter. Those speeds are the starting point the guide gives, so adjust them to your dough and check the result. Our how to use a KitchenAid pasta roller guide walks through the full process.
The same guide sets out basic care rules for the pasta roller among the KitchenAid 7 quart attachments:
- Use the roller with pasta dough only.
- Do not immerse it in water or wash it in the dishwasher.
- Never use a knife or any sharp object to remove excess dough.
- Do not run a dish towel through the rollers to clean them.
Check the footnotes before you buy
Among the KitchenAid 7 quart attachments, the ice cream maker footnote excludes specific bowl-lift and tilt-head models, and the page marks the Professional 6.9 L bowl-lift 5KSM7990 as not compatible with its attachments. It also says its attachments are designed for household stand mixers only, so the KitchenAid 7 quart attachments on that list are not a fit test for commercial mixers.
The footnote says the ice cream maker fits tilt-head mixers except 5KSM3310X, 5KSM3311X and 5KSM150PS. It fits bowl-lift mixers except 5KPM5 Heavy Duty, 5KPM50 and 5K5, a family covered in our KitchenAid heavy duty attachments guide.
A 7 quart bowl-lift mixer is not named in those exceptions, but that is not the same as a confirmed fit. Bowl sizes are often written in different units, and 6.9 L is close to 7 quarts, so an exclusion for a model of similar size is a reason to check the exact code first.
KitchenAid’s page also says plainly that not all KitchenAid 7 quart attachments fit every mixer model.
Setting Up the Pasta Roller With Your Mixer
Once you have confirmed the fit, the pasta roller is the attachment most people use first among the KitchenAid 7 quart attachments. Set the mixer on a stable counter, clamp the roller onto the hub, and make sure it is seated before you turn the mixer on. A loose attachment can shift while dough is passing through it, which is a common reason for uneven sheets.
Dough quality decides how smoothly the roller works. Keep the dough firm, rest it wrapped so it does not dry out, and cut it into pieces that are easy to feed. Pass each piece through the roller on the widest setting first, fold it if the recipe calls for that, and then step down the thickness one setting at a time. Lightly flour the sheet between passes, but brush off extra flour so it does not build up on the rollers.
Work at the speed the guide suggests for these KitchenAid 7 quart attachments and watch the sheet as it comes out. If the edges tear, the dough is probably too dry or too thin for that setting. If the sheet sticks, it is usually too wet or has been left too long before rolling. Small changes in flour and water make a bigger difference than the setting itself, so adjust one thing at a time and note the result.
Check your model before you buy
Find the exact model code on the mixer or in its manual, then compare it with the fit wording and footnotes before adding any of the KitchenAid 7 quart attachments to your order.
- Read the model code printed on the mixer, its box or the owner’s manual.
- Match the attachment’s wording: “for all mixers” or “for stand mixers”.
- Check the ice cream maker footnote and its excluded model codes.
- Confirm whether your mixer is tilt-head or bowl-lift, since some footnotes split the two (see our KitchenAid tilt-head attachments guide for the other side).
- Keep the attachment’s model code with your order so you can compare it later.
If your code is not on KitchenAid’s attachment list, treat the fit of these KitchenAid 7 quart attachments as unconfirmed and ask KitchenAid support before buying.
What is not confirmed for KitchenAid 7 quart attachments
The KitchenAid pages read for this guide do not name a 7 quart bowl-lift model code or confirm which attachments fit one, so the 7 quart fit is not confirmed here.
- The exact model code of the 7 quart bowl-lift mixer you own.
- Whether that model appears in the ice cream maker footnote, since the footnote lists exceptions by code and not every model.
- Which attachments the model’s own product page lists as compatible.
To close these gaps, use the model code in the owner’s manual, then compare it with the attachment list. If the code is still unclear, KitchenAid support can confirm fit for that exact model.
Cleaning and Storing the Pasta Parts
Pasta parts from the KitchenAid 7 quart attachments are simple to clean when you deal with them right after use. Dough that dries on the rollers or inside the cutter is much harder to remove later, so clear each piece while it is still soft and wipe it with a dry cloth. Let every part air dry fully before storing it in a closed container.
- Unplug the mixer and remove the attachment before any cleaning.
- Brush away loose flour and dough from the rollers and cutter strands with a soft dry brush.
- Do not immerse the roller in water, do not wash it in the dishwasher, and do not use a knife to scrape it.
- Store the roller and the cutter set together in one dry place, so the matching strands stay with their set.
Keeping the packaging for your KitchenAid 7 quart attachments, the model code and the cutter widths in one place makes it easier to reorder a part later. If a piece is bent or worn, stop using it and contact KitchenAid support rather than forcing it through the rollers.
Frequently Asked Questions
Do KitchenAid attachments fit every mixer?
No. KitchenAid’s attachment page says “Not all attachments fit every mixer model.” Some items say “for all mixers”, others say “for stand mixers”, and a few are excluded for specific models, so check the wording and footnotes for your code.
Where do I find my model code?
Check the mixer itself, its box or the owner’s manual for the model code. Then compare that code with the fit notes on KitchenAid’s attachment page before you order anything.
Can attachments from older mixers fit?
Some do. Wikipedia’s KitchenAid entry says attachments from the 1930s can be used on modern mixers, but that is a general statement, not a model-by-model guarantee. Accessories are not necessarily compatible even across similar models, so check the code.
Are the pasta attachments dishwasher safe?
Not the pasta roller. KitchenAid’s guide says not to immerse it in water or wash it in the dishwasher, and not to run a cloth through the rollers to clean them.
Which attachment should I start with?
If you want one pasta tool from the KitchenAid 7 quart attachments, check the pasta roller (5KSMPSA) first, because its page lists it as fitting all mixers. Confirm that wording against your own model code before you order. For the pasta press, see our KitchenAid pasta extruder guide.
Confirm your mixer’s model code and the footnotes before you order any KitchenAid 7 quart attachment. If your 7 quart model is not named on the attachment list, treat its fit as unconfirmed and check with KitchenAid support first.
9 min readBy Use & ModelKitchenAid Pro Line Attachments: What Fits and How to CheckUpdated Nov 8, 2026
8 min readBy Use & ModelKitchenAid Pro 600 Attachments: What Fits and What to CheckUpdated Nov 8, 2026
8 min readBy Use & ModelKitchenAid Heavy Duty Attachments: Which Ones Fit Your MixerUpdated Nov 15, 2026
7 min readBy Use & ModelKitchenAid Bowl Lift Attachments: Which Pasta Tools Fit Your MixerUpdated Nov 7, 2026
8 min readBy Use & ModelKitchenAid Artisan Mini Attachments: Which Pasta Tools FitUpdated Nov 7, 2026
6 min readBy Use & ModelKitchenAid Classic Plus Attachments: Which Ones Fit and What Each DoesUpdated Nov 7, 2026