KitchenAid Artisan Mini Attachments: Which Pasta Tools Fit
8 min read · by Arjun Mehta · Last updated: November 7, 2026
KitchenAid Artisan Mini attachments that make pasta include the pasta roller, the three-piece cutter set and the pasta press. KitchenAid says its roller and cutter set are designed to work with all stand mixers, but its compatibility page does not name the Artisan Mini, so check your model number before you buy.
Before you buy any KitchenAid Artisan Mini attachments, match the model number on your mixer’s label to the chart, because some bowl accessories are listed only for one model size.
Which KitchenAid Artisan Mini Attachments Fit Your Mixer
For KitchenAid Artisan Mini attachments, the pasta roller (5KSMPSA) and the cutter set (5KSMPRA) are both listed for all stand mixers. The pasta press (5KSMPEXTA) fits every model except the Professional bowl-lift 5KSM7990X. If you own a KitchenAid Classic Plus instead, see Classic Plus pasta attachment compatibility for which tools fit.

For these attachments, KitchenAid’s UK compatibility FAQ describes its attachments as designed to work with all KitchenAid stand mixers, then lists the exceptions. The Artisan Mini is not named on that page, so the fit rests on the all-mixers wording rather than a model-by-model check. If you own a bowl-lift model instead, see our guide to KitchenAid bowl lift attachments.
| Attachment | Model | Listed compatibility |
|---|---|---|
| Pasta roller | 5KSMPSA | All stand mixers |
| Pasta cutters and roller, 3-piece set | 5KSMPRA | All stand mixers |
| Pasta press, 6 shapes | 5KSMPEXTA | All except Professional bowl-lift 5KSM7990X |
KitchenAid KSMPRA 3-pc Pasta Roller/Cutter Set
- 7.5 pounds
Pros & ConsViewHide
Reasons to buy
- Roller and cutter attachments for KitchenAid stand mixers
- Rolls even sheets without hand cranking
- 88% of 9K Amazon ratings are 5-star
Reasons to avoid
- Needs a compatible KitchenAid stand mixer
- Rolls and cuts the dough, but does not fill or fold tortellini
- One of the costlier tools in this guide
KitchenAid KSMPEXTA Gourmet Pasta Press Attachment
- 2.7 pounds
- Prime
Pros & ConsViewHide
Reasons to buy
- Six quick-change discs: spaghetti, bucatini, rigatoni, fusilli, large and small macaroni
- Built-in wire cutter and a storage case
- Stainless steel cleaning tool included
Reasons to avoid
- Needs a KitchenAid stand mixer, sold separately
- Takes more cleanup than a roller
- Premium-priced attachment
Antree 3-1 Pasta Roller & Cutter Attachment Set
- Home
- 3.5 pounds
- Prime
Pros & ConsViewHide
Reasons to buy
- Roller plus spaghetti and fettuccine cutters in one set
- Lower price than the KitchenAid-branded set
- 4.5-star Amazon rating
Reasons to avoid
- Third-party brand, not made by KitchenAid
- Confirm the fit for your mixer before buying
Because the press has only one listed exception, a mini owner shopping for KitchenAid Artisan Mini attachments is not excluded by the published list. If you need written confirmation for your exact model, KitchenAid customer care is the page’s suggested contact.
The model number is usually printed on the mixer’s label or on its underside plate. Read it before you compare the chart, because the tilt-head and bowl-lift groups do not share the same bowl accessories.
The pasta press, the roller and the cutter set all use the same hub seating steps, which are described in the next section.
How to Attach Pasta Tools to an Artisan Mini
Turn the mixer to speed 0 and unplug it before you attach any pasta tool. The hub cover type decides the first move, and the seating steps are the same for each attachment.
Look at the hub before you remove anything. A hinged cover stays attached to the head and flips up, while a removable cover has to be turned off with its knob. Both types lead to the same open hub, so the rest of the procedure does not change. For a full walk-through of the roller, see our guide on how to use the KitchenAid pasta roller.
- Turn the mixer to speed 0 and unplug it.
- Open the hub. Flip up a hinged cover, or turn the attachment knob counterclockwise on a removable cover.
- Insert the attachment shaft into the square hub socket. Rotate it slightly if it does not engage.
- Drop the pin on the attachment housing into the notch of the hub rim.
- Turn the hub knob until the attachment is fully secured.
The steps are taken from KitchenAid’s UK pasta press assembly FAQ, which gives no other restriction on which hub types take the press. The same seating steps apply to most KitchenAid Artisan Mini attachments that use the hub, and our KitchenAid pasta extruder manual guide covers the press in more detail. Check the knob again after the first few turns, since an attachment that is not fully tightened can shift during use.
Keep the mixer at speed 0 while you seat or remove any of these KitchenAid Artisan Mini attachments, and never reach into the hub while the motor could start.
Roller Thickness and Cutter Speed Settings
The pasta roller runs at speed 2, the fettuccine cutter at speed 5 and the spaghetti cutter at speed 7, the highest speed on the chart.

Change the setting each time you switch cutters on your KitchenAid Artisan Mini attachments, because each one has its own speed and noodle width.
| Attachment | Width or sheet | Speed |
|---|---|---|
| Pasta roller, lasagne sheets | Rolled to 14 cm wide | 2 |
| Fettuccine cutter | 6.5 mm | 5 |
| Spaghetti cutter | 2 mm | 7 |
Start the roller on setting 1 when you use KitchenAid Artisan Mini attachments and move up gradually, dusting each piece with flour so it does not stick. KitchenAid’s pasta cutter and roller tips give these settings and the roller’s pasta-only rule.
The roller has eight thickness settings for lasagne sheets. Work through them one step at a time, starting at setting 1 as the tips page advises. Those same settings carry over to layered dishes, and rolling lasagna sheets on a KitchenAid shows how to prepare them for assembly.
The pasta roller is designed to be used with pasta dough only, so keep other foods out of it, whichever KitchenAid Artisan Mini attachments you run.
Bowl Accessories Listed for the 3.3 L Model
The 3.3 L stand mixer, model 5KSM3311X, has its own list of bowl tools that other sizes do not share. Check that list if you plan to buy a bowl accessory with your KitchenAid Artisan Mini attachments.
- Flex edge beater, 5KFE35T
- Dough hook, non-stick, 5KSM35CDH
- Mixer whisk, 5KSM35WW
- Paddle attachment, non-stick, 5KSM35CFB
- Splatter guard, 5KSM35PS
Other sizes use different lists. The 4.3 L and 4.8 L tilt-head models share their own set of accessories, including the flex edge beater 5KFE5T and the non-stick dough hook 5K452DH, so do not mix the lists up. The splatter guard is also split by size: 5KSM35PS is for the 3.3 L model, while 5KN1PS fits 3 L, 4.3 L and 4.8 L bowls and excludes glass, ceramic and special textured metal bowls.
These bowl tools are separate from the pasta attachments. A match in this list does not confirm that a pasta tool fits, so use the first table for the pasta KitchenAid Artisan Mini attachments.
Cleaning and Care Rules for Pasta Attachments
Let KitchenAid Artisan Mini attachments air dry for about an hour, then brush off the dough. KitchenAid says they must not be immersed in water or washed in the dishwasher.
- Let the attachment air dry for about one hour.
- Remove dried dough with the included brush. Tap the part or use a toothpick if needed.
- Polish with a soft, dry cloth and store in a dry place at room temperature.
- Never scrape excess dough with a knife or any sharp object.
- Do not run a dish towel or other cloth through the rollers.
The order matters: the page says to air dry for about an hour before you remove dough with the brush, so start the cleaning after the pieces have dried. Once the pasta is cut, see how to store fresh pasta for fridge, freezer and drying methods.
Unplug the mixer before you clean anything. Brushing soon after use is easier than working at dough that has dried on the KitchenAid Artisan Mini attachments.
Frequently Asked Questions
Do KitchenAid pasta attachments fit every Artisan Mini?
The roller and cutter set are listed for all stand mixers, but the KitchenAid Artisan Mini is not named on that compatibility page. Match the model number on your mixer’s label to the chart before you buy, and ask KitchenAid if the label is unclear.
Can the pasta press go on a Professional bowl-lift mixer?
No. The pasta press is listed for all models except the Professional bowl-lift 5KSM7990X, so that mixer is excluded. The roller and cutter set are listed for all stand mixers.
Which hub cover does my mixer have?
A hinged cover flips up to open. A removable cover comes off when you turn the attachment knob counterclockwise. Once the hub is open, the seating steps are the same for each of the KitchenAid Artisan Mini attachments that use it.
Can I put the pasta roller in the dishwasher?
No. KitchenAid says these KitchenAid Artisan Mini attachments must not be immersed in water or washed in the dishwasher. Let them air dry for about an hour, then brush off the dried dough with the included brush.
What widths do the roller and cutters make?
The roller rolls lasagne sheets to 14 cm wide. The fettuccine cutter makes 6.5 mm noodles, and the spaghetti cutter makes 2 mm noodles, so choose the cutter that matches your recipe.
Do the pasta press, roller and cutter set use the same hub steps?
Yes. KitchenAid’s UK press assembly FAQ and its pasta cutter and roller tips describe the same sequence: power off, seat the shaft in the square socket, drop the pin into the notch, then tighten the hub knob. The steps are the same for every KitchenAid Artisan Mini attachment that uses the hub.
Start with the pasta roller or the cutter set when you shop for KitchenAid Artisan Mini attachments, since both are listed for all stand mixers. Add the pasta press only after you confirm your model number, because it is the one pasta tool with a published exclusion.
8 min readBy Use & ModelKitchenAid Artisan Attachments: Which Pasta Tools Fit Your MixerUpdated Nov 8, 2026
7 min readBy Use & ModelKitchenAid Bowl Lift Attachments: Which Pasta Tools Fit Your MixerUpdated Nov 7, 2026
7 min readBy Use & ModelKitchenAid Pro 5 Plus Attachments: Pasta Press Fit, Setup and SpeedsUpdated Nov 8, 2026
6 min readBy Use & ModelKitchenAid Classic Plus Attachments: Which Ones Fit and What Each DoesUpdated Nov 7, 2026
8 min readBy Use & ModelKitchenAid Pro 600 Attachments: What Fits and What to CheckUpdated Nov 8, 2026
8 min readBy Use & ModelKitchenAid Classic Attachments: Which Ones Fit and What Each DoesUpdated Nov 15, 2026