KitchenAid Professional 600 Attachments for Pasta: What to Buy
8 min read · by Arjun Mehta · Last updated: November 12, 2026
KitchenAid Professional 600 attachments for pasta come in two main types: a roller with cutters and a pasta press. Both connect through the front hub on the mixer, so the first step is confirming that your model supports hub attachments before you buy. The choice between them depends on the shapes you want and how much hands-on time you will spend.
Among the kitchenaid professional 600 attachments for pasta, the roller and cutter set suits fresh noodles and needs less hands-on work. The press suits short shapes but runs slowly and needs a low speed setting.
Which KitchenAid Professional 600 attachments fit pasta making
Most kitchenaid professional 600 attachments for pasta connect through the front attachment hub, and hub-powered parts work across mixer generations.
According to Wikipedia’s entry on KitchenAid, every mixer has an attachment hub on its front. The same entry says cross-generation compatibility applies only to attachments powered through the hub, so a pasta roller or press that runs off the hub is the kind of part that can move between mixer generations.
Other accessories follow different rules. Beaters and bowls are not necessarily compatible even across similar models built at the same time, and not all current six-quart bowl-lift mixers use the same accessories. For a Professional 600, check the manual and the attachment listing for your exact model before you buy any kitchenaid professional 600 attachments for pasta, including third-party parts.
Capacity, motor power and current price for the Professional 600 were not confirmed for this article. Check those details on the official model page before you compare attachment costs.

How to choose between a roller set and a pasta press
A roller and cutter set makes flat sheets and long noodles, while a pasta press forces dough through plates to make short shapes.
The table below compares the two options on the criteria that matter most for kitchenaid professional 600 attachments, based on the America’s Test Kitchen review of KitchenAid’s pasta attachments.
| Criteria | Roller and cutter set | Gourmet pasta press |
|---|---|---|
| Shapes | Sheets, fettuccine and a thin noodle | Spaghetti, bucatini, rigatoni, fusilli, large and small macaroni |
| Adjustment | 8 thickness settings | Interchangeable plates; speed is the main control |
| Speed guidance | Reviewers called it a faster, more automated way to make fresh pasta | Speed 6 or lower; the manual’s speed 10 overheated the gears |
| Batch time | Not reported in the review | About 22 to 27 minutes per 1-pound batch |
| Cleaning | Not reported in the review | Hard to clean, per the reviewers |
| Review verdict | Recommended | Not recommended; “an OK option for some shapes” |
If you mainly want fresh noodles, the roller set is the better match among kitchenaid professional 600 attachments. If you want short shapes and accept a slower process, the press can work, provided you keep the speed low.
KitchenAid KSMPRA 3-pc Pasta Roller/Cutter Set
- 7.5 pounds
Pros & ConsViewHide
Reasons to buy
- Roller and cutter attachments for KitchenAid stand mixers
- Rolls even sheets without hand cranking
- 88% of 9K Amazon ratings are 5-star
Reasons to avoid
- Needs a compatible KitchenAid stand mixer
- Rolls and cuts the dough, but does not fill or fold tortellini
- One of the costlier tools in this guide
KitchenAid 5KSMPEXTA Gourmet Pasta Press with Six
- Kitchen Aid
- 1.2 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Official KitchenAid press with six plates: spaghetti, bucatini, rigatoni, fusilli and two macaronis
- Built-in wire cutter sets the pasta length
- 76% of 1.4K Amazon ratings are 5-star
Reasons to avoid
- Fits KitchenAid stand mixers only
- Six shapes only, so other shapes need extra dies
- Premium-priced attachment compared with a basic roller set
KitchenAid KSMPDX 5-piece Pasta Deluxe Set
- 2 kg
- Prime
Pros & ConsViewHide
Reasons to buy
- Five-piece roller and cutter set for KitchenAid stand mixers
- Stainless steel rollers and cutters
- Eight thickness settings and 6-inch sheets
Reasons to avoid
- Needs a KitchenAid stand mixer, sold separately
- Costs more than the 3-piece KSMPRA set
- Not covered by the sources used in this guide
The boxes above show three KitchenAid Professional 600 attachments for pasta: the roller and cutter set, the Gourmet Pasta Press and the 5-piece Pasta Deluxe Set from Amazon. The Deluxe set follows the same roller idea with extra pieces, so check its listing for the exact parts and for fit with your mixer.
KitchenAid 3-Piece Pasta Roller and Cutter Set
The 3-piece roller and cutter set, one of the kitchenaid professional 600 attachments most often recommended for fresh pasta, has eight thickness settings and cuts fettuccine and a thin noodle, and America’s Test Kitchen recommended it.

Among kitchenaid professional 600 attachments, the reviewers described the set as “a good option for those who have a KitchenAid stand mixer and would like a slightly faster, more automated way of making fresh pasta.” That description fits a cook who wants to skip most of the hand cranking that a manual roller needs. Our KitchenAid pasta roller guide lists the set and its specs, and is a KitchenAid pasta attachment worth it helps you decide whether to buy one.
The set includes three parts:
- A roller with eight thickness settings for sheets of dough.
- A fettuccine cutter for wide ribbons.
- A thin cutter that makes strands as thin as angel hair. The test page calls it a spaghetti cutter, so match the label to the strand you expect.
The reviewers also warned about handling. Sheets could feed sideways on the automated setting, and delicate gluten-free dough tore. Support the sheet as it feeds and check each pass for tears before you move to a thinner setting.
KitchenAid Gourmet Pasta Press and its six shapes
The Gourmet Pasta Press makes six shapes through interchangeable plates, but America’s Test Kitchen did not recommend it among kitchenaid professional 600 attachments.

The press makes spaghetti, bucatini, rigatoni, fusilli, and large and small macaroni. The reviewers advised readers to ignore the included recipe and instructions, because the manual’s suggested speed 10 overheated the gears and damaged the test mixer.
Running the press safely comes down to speed. Follow these steps:
- Set the mixer to speed 6 or lower, which the reviewers found worked best for rigatoni and spaghetti.
- Expect a slow batch. One pound took about 22 to 27 minutes in the test.
- Plan extra time for cleaning, since the reviewers found the press hard to clean.
A search result suggested this press may no longer be sold new. Check whether the current listing is available before you plan a purchase around it, since availability changes for kitchenaid professional 600 attachments over time. If you prefer extruded shapes from a separate machine, read how to use a pasta extruder first.
Dough basics for attachment pasta
King Arthur’s fresh egg pasta uses 3 large eggs with 280 to 290 grams of flour, and the dough should rest at least 30 minutes before rolling.
The steps below follow the King Arthur fresh pasta recipe, which serves four to five people:
- Combine 2 cups (290 g) of pasta flour blend, or 2 1/3 cups (280 g) of all-purpose flour, with 3 large eggs and 1/2 teaspoon of table salt.
- Work the dough until it comes together. King Arthur notes that hand-mixed dough “will seem dry at first,” so keep kneading for 1 to 2 minutes until it is smooth and firm.
- Wrap the dough and rest it at room temperature for at least 30 minutes, or refrigerate it overnight. Refrigerated dough needs at least 30 minutes at room temperature before rolling.
- Divide the dough into two pieces of about 220 g. Keep one covered while you roll the other.
- Pass the dough through the widest setting, fold it in thirds, and roll again. Step down one setting at a time until you reach the thickness you want.
- Boil the cut noodles for 3 to 4 minutes in 4 quarts of salted water.
After rolling to the final setting, King Arthur cuts the sheets into 12-inch pieces, dusts them lightly with flour, and passes them through the noodle cutter. If you start the dough in a food processor, the same recipe says to process until it forms “a large clump with just a few loose bits,” then knead by hand for about 2 minutes.
King Arthur suggests settings seven to nine on its Atlas 150 manual machine. Use your own roller’s chart for the setting, because attachment settings differ between machines. If a part wears out, KitchenAid pasta roller parts shows what comes with each model.
Common mistakes with KitchenAid pasta attachments
Most pasta problems with kitchenaid professional 600 attachments come from running the mixer too fast, working dough that is too dry, and rolling before the dough has rested.
- Running the press at speed 10, which overheated the gears in the test.
- Stopping too early. Dough that “will seem dry at first” often comes together after more kneading.
- Skipping the rest period, which leaves the dough harder to roll evenly.
- Letting sheets feed without support, which led to sideways feeding in the roller test.
Frequently Asked Questions
Does the KitchenAid Professional 600 take every pasta attachment?
No. Hub-powered kitchenaid professional 600 attachments can move across mixer generations, but other accessories are not guaranteed to fit. Check the manual or the seller’s compatibility list for your exact model before you buy.
Is the pasta press worth buying?
It makes six shapes, but America’s Test Kitchen did not recommend it. Among kitchenaid professional 600 attachments it runs slowly and is hard to clean. If you mainly want fresh noodles, the roller and cutter set is the better fit.
Should I buy a third-party pasta attachment?
Third-party listings may claim compatibility, but fit depends on the exact model. Confirm the mixer model with the seller in writing and read the hub guidance in your manual before you buy.
How long should pasta dough rest?
King Arthur’s recipe says at least 30 minutes at room temperature, or overnight in the refrigerator. Bring refrigerated dough to room temperature for at least 30 minutes before rolling.
How long does fresh pasta take to cook?
King Arthur’s recipe boils fresh noodles for 3 to 4 minutes in 4 quarts of salted water. Start checking the noodles at the short end of that range.
If you mainly want fresh fettuccine or angel hair, start with the roller and cutter set. Before you buy any kitchenaid professional 600 attachments, confirm your model and its hub in the manual, because accessory fit varies by model.
8 min readBy Use & ModelKitchenAid Pro 600 Attachments: What Fits and What to CheckUpdated Nov 8, 2026
7 min readBy Use & ModelKitchenAid Bowl Lift Attachments: Which Pasta Tools Fit Your MixerUpdated Nov 7, 2026
8 min readBy Use & ModelKitchenAid Artisan Mini Attachments: Which Pasta Tools FitUpdated Nov 7, 2026
8 min readBy Use & ModelKitchenAid Artisan Attachments: Which Pasta Tools Fit Your MixerUpdated Nov 8, 2026
7 min readBy Use & ModelKitchenAid Pro 5 Plus Attachments: Pasta Press Fit, Setup and SpeedsUpdated Nov 8, 2026
8 min readBy Use & ModelKitchenAid Heavy Duty Attachments: Which Ones Fit Your MixerUpdated Nov 15, 2026